Pioneer PRO DJ LINK Setup Manual page 28

Setup manual (28 pages)

Table of Contents

Checking the connections

Checking the DJ player's link established by LAN connection (for the CDJ-2000)

Check that the player number indicated on the DJ player's screen is lit in white.

Connecting to LINK

! In case the player No. lights up gray, LINK connection is not established. When there is a DJ player that is lighted up in gray, redo the connection procedure once again.

! Similarly, check the other DJ players.

Checking the DJ player's link established by LAN connection (for the CDJ-900)

Touch and hold the [MENU/UTILITY] button of DJ player for 1 second or more to open the [UTILITY] screen, and confirm that

[LINK STATUS] is set to [CONNECTED].

Connecting to LINK

UTILITY

PLAYER No.

LINK STATUS

AUTO STANDBY

MIDI CHANNEL

! In case [NOT CONNECTED] is displayed, LINK connection is not established. In case of the DJ player where [NOT CONNECTED] is displayed, redo the connection proce-

dure once again.

! Similarly, check the other DJ players.

Checking the connected device(s)

1 Press one of the medium select buttons to check the connection with the respective device.

— To use a computer (Mac/Windows) connected by wired LAN: Press the [LINK] button.

— When a storage device (USB/SD) set to other players where LINK is connected is to be used: Press the [LINK] button.

— To use a USB device connected by wire to the USB (A terminal): Press the [USB] button.

— To use an SD memory card: Press the [SD] button.

! The following describes an example for when using a computer (Mac/Windows) connected by wired LAN (for when the [LINK] button is pressed).

2 Press the [LINK] button.

BROWSE

LINK