Page 1
32 LCD TV User Guide MUTE POWER TV/CATV PICTURE SWAP SOUND VIDEO COMP. WIDE DIGEST ZOOM WINDOW DISP V-CHIP C.C. INDEX Sub-Page HOLD REVEAL MENU AUTO VOL- ENTER VOL+ SLEEP SKIP CH RTN...
3. Connect the equipment into an outlet on a circuit which is different from what the receiver is connected to. 4. Consult the dealer or an experienced radio/TV technician for help. Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user authority to operate the equipment.
Warnings and Precautions To prevent any injuries, the following safety precautions should be observed in the installation, use, servicing and maintenance of this equipment. Before operating this equipment, please read this manual completely, and keep it nearby for future reference. This symbol is intended to alert the user to avoid the risk of electric shock.
Page 4
▪ Remove the plug from the wall outlet, if the equipment will not be used for a long period of time. ▪ Do not place, use or handle this equipment near water. ▪ Never expose the equipment to liquid, rain, or moisture. Seek for service if any of the above is spilled into the equipment.
Outdoor If an outdoor antenna is connected, follow the precautions below: ▪ An outdoor antenna should not be located in any area where it could come in contact with overhead power lines, or any other electric light or power circuits. ▪...
Chapter 1 Introducing the LCD TV Various Audio/Video terminals for external equipment connection ▪ 1 set of composite A/V terminals ▪ 1 S-VIDEO terminal ▪ 1 set of component Video input terminals ▪ 1 VGA input terminal ▪ 3 sets of Audio input terminals Digital Noise Reduction ▪...
LCD TV Power Cord User Guide These items are all you need to set up and operate the LCD TV in its basic configuration. Most devices (VCRs, DVD players etc.) come with the necessary cables for connection. If you want to set up a complex system, you may need to purchase extra cables, connectors etc.
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal (refer to page11). Connect the AC power cord at the back of the TV and connect t the power cord to wall outlet. ...
Front/Top View and Controls The LED light indicates when the LCD TV is activated. Turns the LCD TV on and into standby mode. MENU Press once to display the OSD (on screen display), Chooses from different input press again to turn the signal sources.
Page 12
Connects to the composite S-VIDEO and Audio output jacks on external video equipment. AV Output Connects to the composite A/V intput jacks on external video equipment. ANT. Connects to a television antenna via a TV RF signal cable. Chapter 1 Introducing the LCD TV...
0-9 buttons. The one/two digit numbers by pressing this button. Effective range: The remote can control the LCD TV from up to 5m away, if pointed directly at the receiver. Chapter 1 Introducing the LCD TV Your Remote Control MUTE...
Connecting a TV Cable or Antenna Antenna Connection The antenna requirements for good color TV reception are more important than those for a black & white TV reception. For this reason, a good quality outdoor antenna is strongly recommended. The following is a brief explanation of the type of connection that is provided with the various antenna systems.
Page 15
A. Combination VHF/UHF antenna B. Separate VHF and/or UHF antennas Chapter 2 Installing the LCD TV VHF/UHF Antenna 300/75-ohm adapter (not included) VHF/UHF Antenna 300-ohm twin- lead cable 75-ohm coaxial cable Antenna Combiner 300-ohm twin- (not included) lead cable 75-ohm...
Page 16
Use of this TV for other than private viewing of programs broadcasted on UHF, VHF or transmitted by cable companies for the use of the general public may require authorization from the broadcast/cable company, and/ or program owner.
Page 17
Use a supplied antenna cable to connect the VHF/UHF signal to the LCD TV’s ANT. terminal. Connect the AC power cord at the back of the TV and connect t the power cord to wall outlet. Press the button on the remote to turn on the LCD TV.
METHOD A: Use an audio cable to connect the VCR’s audio output jacks to the LCD TV’s audio inputs. Use an S-Video cable to connect the VCR’s S-video output jack to the LCD TV’s S-video input jack. METHOD B: Use a composite cable to connect the VCR’s composite video/audio jacks to the LCD TV’s...
LCD TV’s audio input jacks. METHOD B: Use an audio cable to connect the DVD’s audio output jacks to the LCD TV’s audio inputs. Use an S-Video cable to connect the DVD’s S-video output jack to the LCD TV’s S-video input jack.
Page 20
METHOD A: Use an audio cable to connect the TV Cable Box’s audio output jacks to the LCD TV’s audio inputs. Use an S-Video cable to connect the TV Cable Box’s S-video output jack to the LCD TV’s S-video input jack.
To watch programs via satellite receiver, press the YCbCr button on the remote. To watch TV via TV cable box, press the VIDEO button on the remote repeatedly to select S-VIDEO( METHOD A), or PC Chapter 2 Installing the LCD TV...
Connecting a Video Camara METHOD A: Use an audio cable to connect the video camera’s audio output jacks to the LCD TV’s audio inputs. Use an S-Video cable to connect the VCR’s S-video output jack to the LCD TV’s S-video input jack.
Use a composite cable to connect the TV’s composite video/audio input jacks. Connect all AC power sources, before turning the LCD TV’s power switch on. Press the button on the remote to turn on your LCD TV.
Use a D-SUB cable to connect the PC’s D-SUB output jack to the LCD TV’s VGA input jack. Use an audio cable to connect the PC’s audio output jacks to LCD TV’s. Connect all AC power sources, before turning on the power switch of the LCD TV or other connected equipment.
Press the DISPLAY button to display information such as the channel and channel label. Press the DISPLAY button again to hide the information. If the LCD TV does not display any picture, check all the connections. Watching Your LCD Chapter 3 Using the LCD TV...
Press the button to turn the LCD TV on. To select the signal source, press the MENU button on the remote control. The main menu will appear on the screen. Use IMAGE MENU: MAIN MENU : IMAGE BIRGHTNESS...
Page 28
Press the button to exit the menu. MENU FULL ► ► ► ENGLISH 15 SEC FULL MEDIUM NORMAL ► CATV MONO ► ENTER to change the value of the item. VOL- VOL+ Chapter 3 Using the LCD TV button. While in...
Automatically scans and stores all the TV channels With the LCD TV connected to a television programming source, press the TV button on the remote control. Press the MENU button on the remote control to display the Main menu, and use...
Page 30
Hiding the TV channels Press the MENU button on the remote control to display the Main menu, and use to select the TV SET, and press the Press to select CHANNEL, then press the VOL+- to select the channel you choose to hide.
Page 31
Setting the Favorite TV channels Press the MENU button on the remote control to display the Main menu, and use to select the TV SET, and press the MAIN MENU : TV SET CH MODE CHANNEL EDIT FAVORITE STATION...
Customizing the Picture Settings Press the button to turn the LCD TV on. Press the MENU button to display the Main Menu : MAIN MENU : IMAGE BIRGHTNESS CONTRAST SATURATION SHARPNESS PHASE PREQ : SELECT MENU : SELECT ITEM...
Page 33
This setting controls the overall appearance of the picture, and is chosen IMAGE MODE from among the following options: STANDARD, BRIGHT, SOFT, MOVE STANDARD, MOVE BRILLIANT. Restores the original factory settings. RESET Chapter 3 Using the LCD TV...
Customizing the Audio Settings Press the button to turn the LCD TV on. Press the MENU button to display the Main Menu.Press MAIN MENU : AUDIO BASS TREBLE BALANCE VOLUME RESET : SELECT MENU : SELECT ITEM ENTER: NEXT : EXIT ...
Customizing the Picture Color Settings Press the button to turn the LCD TV on. Press the MENU button to display the Main Menu.Press MAIN MENU : RGB COLOR TEMP GREEN BLUE RESET : SELECT MENU : SELECT ITEM...
PIP: switches to picture outside picture screen POP: switches to picture in picture screen DIGEST: switches to multiple screen Selects the main source as TV, C-Video, S-Video, and YCbCr mode. MAIN SOURCE SUB SOURCE Selects the sub source as VGA, and YPbPr mode.
Customizing the OSD Settings Press the button to turn the LCD TV on. Press the MENU button to display the Main Menu.Press MAIN MENU : OSD LANGUAGE TRANSPARENCY OSD TIME OUT : SELECT MENU : SELECT ITEM ENTER: NEXT : EXIT ...
Press to adjust the desired value. Allows selection of the time that elapaes before the TV shuts off SLEEP automatically: Off/30/60/90/120 minutes. Controls how the image is fit inside the screen: NORMAL, FULL, 4:3, ASPECT RATIO 16:9.
Customizing the PIP/POP/DIGEST Settings The PIP/POP/DIGEST feature allows simultaneous viewing of video from two sources (TV, VCR, DVD etc). Only one source’s audio is played at a time; the user may select which source’s audio is Press the PIP button on the remote control to enter picture-in-picture mode, press again to exit PIP mode.
Customizing the V-CHIP Settings The US has 2 rating system for viewing content: Movie bloacking(MPAA) and TV Blocking. The TV Blocking conjuncts with the V-CHIP to help parents block inappropriate programs from their children. The Movie bloacking(MPAA) is used for original movies rated by the Motion Picture Association of America(MPAA) as broadcasted on cable TV and not edited for television.
Page 41
: To block programs by both content and age. to select the rating you want and press the ENTER button to select BLOCK or VOL- VOL+ UNBLOCK. Chapter 3 Using the LCD TV CONTENT-BASED ...
Page 42
▼▲◄►: SELECT ENTER : NEXT V-CHIP: BACK Press the 0-9 buttons to enter a new four-digit password. function, must enter a four-digit password. The factory , then press button to enter into setting ENTER Chapter 3 Using the LCD TV...
The batteries in the remote control may be exhausted. Replace the batteries. No picture, no sound Check the interface cable between TV and antenna/cable TV. Press the button on the remote. Press the button on the remote, then press other input source button to select the connected video sources.
TROUBLESHOOTING Panel System Display Resolution Television System Antenna Input AV IN AV OUT YCbCr YPbPr AUDIO IN AUDIO OUT SPEAKER OUT POWER SOURCE (Power consumption(Max)) DIMENSION WEIGHT Troubleshooting and Specifications SPECIFICATION 32 inch 1366 pixels(horizontal) x 768 pixels (vertical) NTSC 75 Ω...