Presser Foot Lifter; Changing The Presser Foot - Pfaff select line 610A Owner's Manual

Presser foot lifter

The presser foot is raised or low ered w ith
the presser foot lifter (15).

Changing the presser foot

Removing the presser foot
Sw itch off the main sw itch (1)
Position the needle at its highest point.
Press the presser foot upw ards at the front
and dow n at the back at the same time so
that it disengages from the presser foot
holder (26).
Engaging the presser foot
Place the presser foot under the presser
foot holder (26) so that w hen the presser
foot lifter (15) is low ered, the pins of the
foot engage in the presser foot holder.
Check: Please check that the presser foot is
properly engaged by raising the presser foot
lifter.
21