Installing The I/O Shield; Installing The Motherboard - EVGA Z270 Stinger User Manual

EVGA Z270 Stinger (111-KS-E272)

Installing the I/O Shield

The motherboard kit comes with an I/O shield that is used to block internal
components from dust and foreign objects, while also promoting correct
airflow within the chassis.
Before installing the motherboard, install the I/O shield from the inside of the
chassis. Press the I/O shield into place and make sure it fits securely.

Installing the Motherboard

Installing the motherboard into a system case depends on several factors:
whether you are replacing an existing motherboard, whether you are building a
new PC, and the type of chassis that will house your PC components. You must
first determine if it would be easier to secure the motherboard to the chassis or
if it would be easier to install other components prior to this step. It is normally
easier to secure the motherboard first.
Note: Be sure that the CPU fan assembly has enough clearance for the system
case covers to lock into place and for expansion cards. Also, make sure the
CPU Fan assembly is aligned with the vents on the covers; this is to allow the
airflow to properly exhaust from the chassis. The CPU Fan assembly
orientation will depend on the system case being used.
- 25 -