Setting The Remote; Direct Entry - Emerson GirlPower GP765 Owner's Manual

DEVICE BUTTON: When this owner's manual refers to the Device button, it is
referring to the TV, SAT/CABLE,VCR or AUDIO Device button you want to control.

DIRECT ENTRY

Directly enter the three digit code found at the end of this manual as follows:
1
Turn on the power to the desired device you
want to control and press the respective
Device button (i.e. TV). Using the Remote
Codes table found at the end of this manual,
look up the brand and remote code for the
device.
3
Using the Key buttons (0-9), enter the
three digit code of the desired device; the
Red indicator will go out. If the red
indicator blinks twice, it was done
incorrectly - repeat steps.

SETTING THE REMOTE

2
Press and hold the SET button
TV button
indicator will light. Release both buttons.
4
Aim the remote at the device and press
the Power button. If the device turns off,
then it is set. It is does not, repeat these
steps with another code. Write the code
down and repeat these steps for your
other devices.
3
1
2
, then the
simultaneously; the Red