3-4 DISPLAY
IMPORTANT: Before you begin, unplug your refrigerator.
1. To disassemble, remove the cover hinge from any door.
Left Door
Release the two screws from
the upper lid (1) remove it after that.
2.Whit a screwdriver, remove the screw from Display.
3.Unplug the connector.
NOTE: To assemble, follow the instruction above, at
inverse order.
1
- 6 -
3-5 MULTI DUCT
1. Remove an upper and lower Cap by using a flat
screwdriver, and loosen 2 screws.
2. Disconnect the lead wire on the botton position.