Cisco SF250-24-K9 Quick Start Manual page 8

Open a Web browser window. If you are prompted to install an
S 4
TEP
ActiveX plug-in when connecting to the device, follow the prompts
to accept the plug-in.
Enter the switch IP address in the address bar and press Enter. For
S 5
TEP
example, http://192.168.1.254.
The Switch Login Page displays.
Enter the default login information:
S 6
TEP
• Username is cisco
• Default password is cisco (passwords are case sensitive)
Click Log In.
S 7
TEP
If this is the first time that you have logged on with the default
username and password, the Change Password page opens. The
rules for constructing a new password are displayed on the page.
Enter a new password and confirm the password.
S 8
TEP
Password complexity is enabled by default. The password
N
OTE
must comply with the default complexity rules or it can be disabled
temporarily by checking Disable next to the Password Strength
Enforcement option.
Click Apply.
S 9
TEP
Make sure that any configuration changes made are saved
C
AUTION
before exiting from the web-based interface by clicking on
the Save icon. Exiting before you save your configuration will
result in all changes being lost.
The Getting Started window displays. You are now ready to configure the
switch. Refer to your Administration Guide for further information.
8 Cisco 250 Series Smart Switches