Do you have a question about the STR-FL80 and is the answer not in the manual?
Questions and answers
Milica
March 2, 2025
My washing machine cannot open at the filter to clean, at the front did not show up special or marked button for opening the pump filter to clean?
1 comments:
Mr. Anderson
March 2, 2025
To open the pump filter on a Stirling STR-FL80 washing machine for cleaning, follow these steps:
1. Open the pump filter cover. 2. Turn the filter counterclockwise to remove it. 3. Remove any foreign objects and clean the filter with water. 4. Reinsert the filter by turning it clockwise to secure it. 5. Close the pump filter cover securely to prevent water leakage.
This answer is automatically generated
Milica
March 2, 2025
How to open the bottom so I can clean the filter
1 comments:
Mr. Anderson
March 2, 2025
To open the bottom of the Stirling STR-FL80 to clean the filter, follow these steps:
1. Remove any foreign objects and clean the filter with water. 2. Reinsert the filter by turning it clockwise to secure it. 3. Close the pump filter cover securely to prevent water leakage.
Ensure the filter is properly reinstalled and the cover panel is securely closed.
Page 1
8kg Front Load Washing Machine Model Number STR-FL80 INSTRUCTION MANUAL AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 2
3 Year In Home Warranty. We hope you will enjoy using your purchase for many years to come. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Welcome Warranty Details General Safety Instructions Product Overview Installation Getting Started Instructions FAQs and Troubleshooting Guide Other Useful Information Repair and Refurbished Goods or Parts Notice AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
If the cord is damaged, it must be replaced by the manufacturer’s service agent or a properly qualified person in order to avoid a hazard. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 6
Do not reuse old hose sets. The required water pressure is 0.03MPa (min.) to 1.0MPa (max.). CAUTION! This machine has only one inlet for water (cold). Do not connect it to the hot water supply. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 7
- Rain jackets, raincoats, fishing coats and similar waterproof clothes or covers. - Carpets or floor rugs. - Underwire bras (damage to the appliance can result if metal reinforcements come loose during the washing cycle). AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 8
• Service: This appliance should only be serviced by authorised service personnel, and only genuine spare parts should be used. To purchase spare parts, please contact our after sales support centre. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Due to continued product improvement, images and illustrations in this manual may vary slightly from the product purchased. All images in this manual are for reference purposes only. Parts are not necessarily pictured to scale. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
• If the machine is stored in an area where the temperature drops to below 0°C, transfer it to an area with a warmer ambient temperature before use and ensure no residual water is frozen in hoses and pipes. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 11
• Behind a lockable or sliding door, or a door with a hinge on the opposite side of the machine, in such a way that a full opening of the appliance door is restricted. • In a tight-fitting cabinet. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 12
Fig. 5 Lock nut Foot WARNING! The lock nuts on all four feet must be screwed tightly against the housing (Fig. 5-4). AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 13
• Use only the new (supplied) hose with your new appliance. Do not use a hose from an existing machine, or one that has been used previously. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 14
• Be sure the drain hose is properly routed so it will not kink or lift off the sink. • Leave the drain hose affixed to the back of the machine; do not remove the hose buckles. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 15
• All electrical connections must be made by qualified personnel, and all instructions in this manual as well as local safety regulations must be observed. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Close door Add detergent Washing (Fig. 12) Select program Select option Start up (or skip for default) After washing (Fig. 13) Unplug Open door Unload Close tap AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 17
Icons will illuminate when you have the buzzer (B) muted, child lock (C) set or door lock (D) activated. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Press and hold the Temp. button for approximately 3 seconds until a buzzer sounds. The door and all buttons will now be locked. To cancel the child lock, repeat this action. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 19
The middle compartment is for fabric softener. It will be dispersed through the washing during the last rinse cycle. Concentrated fabric softeners should be diluted as required. Do not exceed the full mark line. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 21
To check the delay time, press the Delay Start button and the delay time will be displayed for five seconds. NOTE: The actual delay time varies depending on the selected program. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 22
(by repeating this action). CAUTION! Once the buzzer is muted, you will no longer be alerted audibly to the end of a program or a malfunction. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 23
- Items such as ties, suits, evening attire; silk or fur attire; or anything else labelled unsuitable for machine-washing. Always check the garment label (see page 28). AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 24
Unload: Open the door and unload the washing machine. We recommend you leave the door slightly ajar so the drum can dry properly and to prevent mould and odour development. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
• Restart the washer. • If the problem still persists after restarting, Other problems unplug the washer, close the water tap and contact our after sales support centre. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 26
• Ensure to check pockets • A loose object knocks before the wash and remove against the drum walls. any coins, hairpins, etc. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 27
If none of the solutions offered above and on the previous pages help you solve the problem, please contact our after sales support centre for advice. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
(max 150 Tumble dry normal Drip dry y clean normal cycle with any solvent y clean normal cycle Dry flat Line/hang to dry petroleum solvent only AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 29
• To remove scum build-up from the inside and outside of the washing machine’s drum, run a the Drum Clean program without clothes and detergent. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 30
NOTE: Do not use any solvents, alcohol, harsh chemicals, alkaline or abrasive cleaning agents, or sharp objects, to avoid damaging the surface. Press here ... Fig. 19 Fig. 20 and pull out AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 31
4. When all frozen water has thawed, reconnect the water supply hose, open the tap and start the machine to check whether all blockages have been removed. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 32
Let the machine air-dry thoroughly, then store it in the original packaging in a dry location, out of reach of children. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 33
• Tub drain hose assembly • Tub water inlet hose assembly • Universal motor • Upper counterweight • Water inlet valve and hose • Water level sensor AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Page 34
Due to continued product improvement, images and illustrations in this manual may vary slightly from the product purchased. All images in this manual are for reference purposes only. Parts are not necessarily pictured to scale. AFTER SALES SUPPORT info@tempo.org 1300 886 649 MODEL: STR-FL80 PRODUCT CODE : 11969 11/2019...
Need help?
Do you have a question about the STR-FL80 and is the answer not in the manual?
Questions and answers
My washing machine cannot open at the filter to clean, at the front did not show up special or marked button for opening the pump filter to clean?
To open the pump filter on a Stirling STR-FL80 washing machine for cleaning, follow these steps:
1. Open the pump filter cover.
2. Turn the filter counterclockwise to remove it.
3. Remove any foreign objects and clean the filter with water.
4. Reinsert the filter by turning it clockwise to secure it.
5. Close the pump filter cover securely to prevent water leakage.
This answer is automatically generated
How to open the bottom so I can clean the filter
To open the bottom of the Stirling STR-FL80 to clean the filter, follow these steps:
1. Remove any foreign objects and clean the filter with water.
2. Reinsert the filter by turning it clockwise to secure it.
3. Close the pump filter cover securely to prevent water leakage.
Ensure the filter is properly reinstalled and the cover panel is securely closed.
This answer is automatically generated