Reset Your Machine - Brother DCP-T226 Online User's Manual

Home > Troubleshooting

Reset Your Machine

The following reset functions are available.
>> Machine Reset
>> Network (DCP-T420W/DCP-T425W/DCP-T426W/DCP-T428W)
>> All Settings
Machine Reset
You can reset all the machine's settings that you have changed, such as Date and Time.
1. Press (Stop) and Mono Start simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts
blinking.
2. Press and hold Mono Start for two seconds.
3. Wait until the machine restarts and the Power LED indicator lights up before disconnecting the machine from
the power source.
Network (DCP-T420W/DCP-T425W/DCP-T426W/DCP-T428W)
Reset the print server back to its default factory settings (includes Password and IP Address information).
1. Press WiFi Button/LED and
The Power LED, Warning LED, and Ink LED light up for one second, and then the WiFi Button/LED starts
blinking.
2. Press and hold Color Start for two seconds.
3. Wait until the machine restarts and the Power LED indicator lights up before disconnecting the machine from
the power source.
All Settings
Use this reset function to reset all machine's settings to the settings originally set at the factory.
Brother strongly recommends you perform this operation when you dispose of the machine.
1. Press (Stop) and Mono Start simultaneously.
The Power LED, Warning LED, and Ink LED light up for one second, and then the Warning LED starts
blinking.
2. Press and hold Color Start for two seconds.
3. Wait until the machine restarts and the Power LED indicator lights up before disconnecting the machine from
the power source.
Related Information
• Troubleshooting
> Reset Your Machine
(Stop) simultaneously.
178