Advertisement
Test
14. Test
Turn RV1 to its centre position
Check that all the switches of the DIP switch are in the OFF state
In case the timer was built for connection to the mains, connect the mains voltage to the points marked MAINS,
otherwise a transformer must be connected to these points, which can supply 24 to 28VAC at 50mA.
BEWARE: when using mains power, certain points in the circuit will carry this voltage.
Be careful what you touch!
Press the start button. Now the relay must be activated (also the LED must come up), and released after a
couple of seconds.
Press the start button and immediately press the stop button. Now the relay must be released immediately.
12
Advertisement
