Table of Contents
Advertisement
N1015158 OPERATING MANUAL
6. TROUBLESHOOTING
The N1015158 is able to indicate malfunctions and incorrect use. The messages available
are directly visible on the display, indicated audibly or transmitted via USB for remote
communication.
6.1. Audible alarm
The N1015158 will send an audible alarm if either a leakage was detected or another failure
occurs.
6.1.1. Water level Alarm
The N1015158 is equipped with a "Water level" sensor. This means even small leakage will
be detected.
After the leakage is signalled on the N1015158 press the RESET ALARM button and
remove the leakage immediately by checking all connections and fill up the system with
distilled water.
6.1.2. Other system Alarms
The following alarms are available:
-
Cell temperature too high
-
Radiator temperature too high
-
Cell temperature sensor failure
-
EEPROM memory failure
If one of these alarms is activated, the N1015158 will signal the failure by an audible signal
and display relative messages on the display.
Action:
Switch off the instrument immediately!
If the failure does not disappear after the instrument is switched on again, contact
service.
14
Advertisement
Table of Contents
