Finding the controls
Portable handset (KX-FKD502)
How to use
To redial the telephone
●
numbers in the redial list.
The last 10 telephone
numbers dialed are stored
in memory.
To start a search in the
●
Number Display log. (For
Number Display service
users.)
To change Hiragana to
●
Kanji.
To adjust the volume.
●
To adjust the ringer
■
volume when the portable
handset is on standby,
press
音量 ")
(press repeatedly)
or
.
To adjust the receiver
■
volume while talking,
press
To adjust the speaker
■
volume while listening to
the recorded messages or
using the speakerphone,
press
To use the speakerphone.
●
To put a call on hold.
●
To page the main unit and/or
●
portable handset(s).
To make/answer calls.
●
To end a call.
●
To end or exit from editing or
●
other operations.
key
(Select " 呼出
repeatedly.
repeatedly.
Dial buttons
Earpiece
Microphone
Do not cover the
microphone while
talking.
Tone button
To switch to tone dialing.
●
Sharp button
Key lock button
To lock the portable handset so that no calls or
●
settings can be made. To turn key lock on, press this
button for about 3 seconds until a single beep is heard.
To turn key lock off, press this button for about 3
●
seconds until a single beep is heard.
Liquid crystal display
Portable handset number and
name
No link to the main unit
Function menu that is
controlled by
Battery strength
When using the
speakerphone
How to use
,
and
buttons refer to the
function displayed on the bottom of the
display. They function differently
depending on the mode.
To answer a second call on the other
●
call, press
. (For call waiting
service users.)
To make a voice call using
●
One-touch dialer.
,
or
buttons
3