Page 4
Read operating instructions before use! Pay attention to the safety instructions! A Chain adjustment Bolt B Chain adjuster C Running direction...
Page 5
= Chain Interception Bolt 1 Oil inspection window (Fig. 2) 2 Front handle 3 Oil tank cap 4 Front hand protection 5 Blade 6 Saw chain 7 Securing nut 8 Pinion lid 9 Switch 10 Rear hand protection 11 Rear handle 12 Mains connection with plug 13 Blade protection 14 Fell handle...
Illustration and explanation of pictograms Wear eyes- and ear- protectors! Warning! Read operation instructions before use Do not subject this electric power tool to rain Remove plug immediately if the power Attention, kick-back! flex is damaged or cut Hold tool with both hands! Introduction to the Operating Instructions These Operating Instructions are intended to facilitate your becoming acquainted with the machine and using it in accordance with the regulations.
Page 7
24. Caution: Only use accessories or parts that are listed 48. If possible, use a stand. in the operating instructions. Use of other tools and 49. Always keep an eye on the bar tip. other accessories mean safety risks for the operator. 50.
Page 8
to some further dripping of oil. the hook as shown in Fig. 6. 2. Assembling the blade and chain (Fig. 3) 5. Switching on (Fig. 2) CAUTION ! Risk of injury ! Always use safety gloves • Press with your thumb the safety button 15 on the left when assembling the chain ! side of the rear handle and then squeeze the operating •...
• Ensure that you have a possible escape route. chainsaw cleaner and close it as usually. Then switch • Ensure that you are standing firmly. on the chainsaw - without bar and chain being mounted • Keep the working area free of objects. - and keep it running until the total rinsing liquid has •...
Need help?
Do you have a question about the CS18301 and is the answer not in the manual?
Questions and answers