Kayoba 960-502 User Instructions page 22

EN
BATTERY CHARGING
1 Insert the enclosed USB charging cable in the charging port to charge the quadcopter
The basic movements become more advanced when you test instantaneous rolling
1 Press button 3 on the top right of the control The remote control emits a continuous acoustic
signal and changes to 3D rolling mode
2 Then press the direction lever (4) in optional direction to execute 3D instantaneous rolling
NOTE:
When lateral drift arises in connection with hovering:
1 Place the quadcopter on a flat surface
2 Manoeuvre the remote control's speed lever (8) to 100% and then trim back to the middle
At the same time keep the remote control's two control levers downwards and to the left for
about 2 seconds
3 Release the levers when the quadcopter's circuit board lamp subsequently flashes
4 The lamp stops flashing after 2 seconds and calibration in the middle position is completed
• Do not leave the quadcopter in the sun or strong light
• Clean the quadcopter with a soft, clean cloth
• Do not wet the quadcopter as the electrical parts can be damaged by moisture
• Regularly check the connections and other parts Do not fly the quadcopter if it has a faulty
component
22
OPERATION
mAINTENANCE