Honda CBF110B Manual page 61

6. Remove the oil filter cover, oil filter, spring
and gasket by removing the oil filter cover
bolts and let the remaining oil drain out.
Discard the oil and oil filter at an approved
►
recycling centre.
7. Install the new oil filter with the OUT-SIDE
mark facing out.
8. Install the new oil filter spring into the oil
filter cover and then install the new gasket
and oil filter cover by tightening the oil filter
cover bolts.
Torque: 10 N·m (1.0 kgf·m, 7 lbf·ft)
9. Install a new sealing washer onto the drain
bolt. Tighten the drain bolt.
Torque: 24 N·m (2.5 kgf·m, 18 lbf·ft)
10. Fill the crankcase with the recommended oil
(2 P. 42) and install the oil fill cap/dipstick.
Engine Oil Changing Engine Oil and Filter
►
Required oil
When changing oil & filter:
0.85 litres (0.90 US qt, 0.75 Imp qt)
When changing oil only:
0.80 litres (0.85 US qt, 0.70 Imp qt)
11. Check the oil level. 2 P. 56
12. Check that there are no oil leaks.
NOTICE
Improper installation of the oil filter can result in
serious damage to the engine.
Oil filter
cover
Bolts
O-ring
"OUTSIDE"
mark
Oil filter
Spring
59