Removing & Installing Body Components
Seat
Stays
52
►
Prongs
Seat
Ignition key
Seat lock
Seat
#
Removal
1. Insert the ignition key into the seat lock.
2. Turn it clockwise, then pull the seat up and back.
#
Installation:
1. Insert the prongs into the stays on the frame..
2. Push forward and down on the rear of the seat
until it locks in place.
Make sure that the seat is locked securely in
position by pulling it up lightly.
The seat locks automatically when closed.
Take care not to lock your key in the
compartment under the seat.