Citizen JDVD3843 Instruction Manual page 22

F)DIGITAL SETUP
The audio setup options are illustrated below:
DYNAMIC RANGE:
You can choose this setting to adjust the dynamic ratio and get different effect. If adjusting
to FULL, the audio signal peak value will be the minimum; while adjusting to OFF,
maximum.
DUAL MONO (LEFT + RIGHT)
Choose this option to setup the L and R mono output mode; There are four modes in this
option: STEREO, MONO L, MONO R, and MIX MONO.
REFERENCE:
To protect your DVD player, the interval between two consecutive Power button opera-
tions must be above 30 seconds.
Please unplug from the electrical outlet when not in use for a long period of time.
The player should be operated only on condition that the type of power supply corresp-
onds to the marking label. Otherwise, it doesn't work or even be damaged.
The player may not be compatible with some encrypted discs.
If the player stops playback by accident, please power it on again.
20