Table of Contents
Advertisement
c) AUDIO SETUP
The audio setup options are illustrated below:
AUDIO OUT
Highlight the AUDIO OUT option, and press the Arrow buttons to choose the audio output
mode you prefer. Press Enter to confirm; There are 3 optional audio output modes:
SPDIF/OFF, SPDIF / RAW, and SPDIF/ PCM.
SPDIF/ OFF: From the Coaxial Output jack, no signal is output.
SPDIF/ RAW: Choose this setting if your DVD player is connected to a power amplifier
with a coaxial cable or an optical cable; When playing a disc recorded with Dolby Digital,
DTS and MPEG audio formats, the corresponding digital signals will be output from the
Coaxial Output jack . This player's digital output jacks are designed for a connection to a
Dolby Digital, DTS , or MPEG receiver or decoder. For the dts CD there is no RAW output
only PCMoutput
SPDIF / PCM: Choose this setting if your DVD player is connected to a 2-channel digital
stereo amplifier; When playing a disc recorded with Dolby Digital and MPEG audio formats,
audio signals will be modulated into a 2-channel PCM signal, and it will be output from the
Coaxial Output jack.
KEY
Use the Up and Down arrow button to move the scroll and adjust the key.
18
Advertisement
Table of Contents
