FINAL ASSEMBLY
Attach the metal base to the chassis with four M12
X 3.5 screws and rubber feet (see Figure W).
Apply the bottom label as shown.
Apply the back label as shown in Figure X.
M12 x 3.5 Screws
Bottom Label
Warning: 300W Max.
Figure X
Insert the iron holder into the slot on either the
right or the left side as shown in Figure Y. Set the
power switch to the OFF position.
Rubber Feet
Rubber Feet
Iron Holder
Figure Y
-15-
Figure W
M12 x 3.5 Screws