PEUGEOT BOXER Handbook page 180

Touch screen audio and telematics system
If the pairing procedure fails, it is
recommended that you deactivate and
then reactivate the Bluetooth function on your
telephone.
Once the pairing procedure is complete, a
screen page appears:
– answer "Yes" to the question; the mobile
phone is registered as the favourite (the mobile
phone will have priority over other mobile
phones, which may be registered later).
– if no other device is associated, the system
considers the first associated device as the
favourite.
For mobile phones that are not set as
favourites, priority is determined by the
connection order. The last phone
connected will have the highest priority.
The services available depend on the
network, the SIM card and the compatibility
of the Bluetooth devices used. Refer to your
®
telephone's user guide and your service provider
to check which services you are able to access.
When you return to the vehicle, the last
phone connected reconnects automatically,
within approximately 30 seconds of switching the
ignition on (with Bluetooth
To change the automatic connection profile,
select the phone from the list then select the
desired parameters.
The profiles compatible with the system are:
HFP, OPP, PBAP, A2DP, AVRCP, MAP.
178
Automatic reconnection
When the ignition is switched on, the telephone
connected when the ignition was last switched
off reconnects automatically, if this connection
mode had been set during the pairing procedure
(see previous pages).
The connection is confirmed by the display of a
message and the name of the telephone.
Managing paired telephones
This function allows a device to be
connected or disconnected, as well as a
pairing to be deleted.
Press "Settings".
Select "Telephone/Bluetooth
telephone from the list of paired devices.
Select "Connect" or "Disconnect", "Delete
device" or "Add device", "Memorise
Favourite", "Text on", "Download" from the list
of available options.
Receiving a call
An incoming call is announced by a ring and a
display overlaid on the screen.
activated).
®
Make a short press on this steering-
mounted button to accept an incoming
call.
or
Press the "Answer" button displayed on the
screen.
If two calls are in progress (one in progress and
one on hold), it is possible to switch from one to
the other by pressing the "Call toggle" button or
unite the two calls in a conference by pressing
the "Confer." button.
Ending a call
To refuse a call, press this steering-
mounted button.
or
Press the "Ignore" button displayed on the
screen.
Making a call
Calling a new number
" then select the
®
You are strongly advised NOT to use the
telephone while driving. We recommend
that you park safely or make use of the
steering-mounted controls.
Press "PHONE".
Press the keypad button.
Enter the telephone number using the keypad,
then press the "Call" button to make the call.
Calling a contact
Press "PHONE".