Turning The Tv On/Off; Easy Setup; Digital Setting - Sharp AQUOS 2T-C32BD1X Operation Manual

Part names (Continued)
TV (Rear)
USB
1
DC5V 1.5A
2
INPUT 2
3
4
5
INPUT 3
6
SERVICE ONLY
7
1 USB terminal*
2 INPUT 1 (HDMI/ARC) terminal
3 INPUT 2 (HDMI) terminal
4 Antenna input terminal
5 INPUT 3 terminals
6 SERVICE ONLY terminal**
7 /AUDIO OUT (L/R) terminal
8 POWER (On/Off) button
9 Keypad Control
* USB terminal use for USB media player. (See page 26.)
** Usually do not connect anything to this terminal as it reserved only for service personnel.
• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from
the actual operations.
• Some features differ depending on the selected country.
2T-C32BD1X_H217_EN.indd 6 2T-C32BD1X_H217_EN.indd 6
8
9
BASIC FUNCTION DURING
JOG-KEY
FUNCTION MENU
r r
CH UP
s CH DOWN s
+ +
VOL UP
– –
VOL DOWN
b (BELOW 1 SEC)
INPUT SELECT/ENTER
b (1 SEC AND OVER) MENU RETURN/MENU EXIT
* Repeat keys

Turning the TV on/off

Turning on/off the power
• To turn on the power
Press POWER on the TV or remote control. (After a few
seconds, an image appears with sound.)
• To turn off the power
Switch it off by pressing POWER on the TV or remote
control.
NOTE
• If you are not going to use this TV for a long period of time,
be sure to remove the AC cord from the AC outlet.
• Minor power is consumed when the unit is in standby
mode.

Easy setup

When the TV powers on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menu and make the necessary settings
one after another.
1
Press POWER on the remote control.
• The initial auto installation wizard appears.
Press ENTER to start the wizard.
2 Press a /b to select the desired language, and
then press ENTER.
Press a /b to select your country channels in
"Location", and then press ENTER.
* Press c / d to select "Home" or "Store", and
then press ENTER.
*
Home:
*
• "STANDARD" will be the default value for the
* "AV mode" setting.
Store:
• "DYNAMIC (Fixed)" will be the default value
for the "AV mode" setting. If the "AV mode" is
changed, the TV will automatically switch back to
"DYNAMIC (Fixed)" when there is no further change
to TV setting for 30 minutes.
• To change the Store mode to Home mode, please
refer to page 16 to reset the unit.
3
Press a /b to select "DTV", "ATV" or
"DTV + ATV" in "Search type", and then press
ENTER.
• Auto installation will be executed.
• You do not need to do anything during the auto
search.
• If you select "Others" country, some of DTV channel
may not tune properly.
Press c / d to select "Start" or "Cancel", and
then press ENTER for searching receivable
channels.
11 12
NOTE
• In the setting of some country, selecting of "DTV", "ATV"
or "DTV + ATV" may not be shown.
• A region or service selection screen may display depending
on the country settings or cable providers selections.
Follow the screen prompts to make the selections.

Digital setting

You can reconfi gure DTV services settings
automatically or manually.
1
Press MENU and the MENU screen displays.
2
Press c / d to select "Initial setup".
3 Press a /b to select "Digital setting", and
then press ENTER. If you have already set the
password, enter it here.
• See "Child lock" to set password.
4 Press a /b to select the desired menu item,
and then press ENTER.
H Auto search
Use this menu to add new services automatically
after auto installation has been completed.
• Press a / b to select "DTV" or "DTV+ATV".
H Manual search
Add new services within a specifi ed channel band.
• Press c / d to fi nd the channel and then press ENTER.
H Signal information
Use this menu to check signal information depends
on receiving channel.
1/10/2019 10:19:03 AM 1/10/2019 10:19:03 AM