Attaching The Stand; Antenna Connection; Symbols Placed On Equipment - Sharp AQUOS 2T-C32BD1X Operation Manual

Attaching the stand

• Before attaching (or detaching) the stand, unplug the AC cord from the AC outlet.
• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from
being damaged.
1
Confi rm the screws supplied with the TV.
Screws (4)
2
Insert the stand assembly into the openings on the bottom of the TV. (1)
3
Insert and tighten the screws into the holes on the rear of the TV. (2)
Stand base with letter "R"
NOTE
• To detach the stand, perform the steps in reverse order.
• Do not attach or detach the stand without holding it. Doing so can cause the stand to fall, resulting in serious personal
injuries as well as damage to the stand.
2T-C32BD1X_H217_EN.indd 3 2T-C32BD1X_H217_EN.indd 3
Soft cushion
Stand base with letter "L"
1
2

Antenna connection

Connect antenna cable to the antenna terminal
If your outdoor antenna uses a 75-ohm coaxial
cable with a standard DIN45325 plug
(IEC 169-2), plug it into the antenna jack at the
rear of the set.
CAUTION
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH
THE AC CORD CONNECTED.
NOTE
• Place the TV close to the AC outlet, and keep the power plug within reach.

Symbols placed on equipment

• This mark indicates the product operates on AC Voltage.
• This mark indicates a class II or double insulated electrical appliance wherein the product does not require a safety
connection to electrical earth (ground).
5 6
1/10/2019 10:19:00 AM 1/10/2019 10:19:00 AM