Controls And Adjustments; Default Dip Switch Settings - Hoshizaki Modular Cubelet Serenity Series Service Manual

B. Controls and Adjustments
Dip switches are factory set. Failure to maintain factory settings may adversely
affect performance and warranty coverage. For more information, contact your
Hoshizaki Certified Service Representative.

1. Default Dip Switch Settings

The S1 dip switch settings are factory-set to the following positions:
Model
FS-1501MLJ-C
NOTICE
S1 Dip Switch
S1 Dip Switch No.
1 2 3 4
ON OFF OFF OFF OFF OFF
Alarm Selection
Shutdown Sequence
Bin Control 2 (BC2) (mechanical backup) Shutdown Delay
Bin Control Selector
Continuous Dispensing Timer
(DCM models only, do not adjust on modular icemakers)
Drain Frequency Control
Bin Control 1 (BC1) (infrared sensor) Shutdown Delay
39
5 6 7 8
ON ON
9 10
OFF OFF