Ports - EverFocus ES2446-51 User Manual

1and 2c management clients.
 SNMP Trap Destination: IP address of the trap manager to receive notification
messages from this switch. Traps indicating status changes are issued by the
switch to specified trap managers. You must specify trap managers so that key
events are reported by this switch to your management station.
 SNMP Read Community: A community string that acts like a password and
permits access with Read privilege to the SNMP database on this switch.
Authorized management stations are only able to retrieve MIB objects.
 SNMP Write Community: A community string that acts like a password and
permits access with Write privilege to the SNMP database on this switch.
Authorized management stations are able to modify the value of the MIB objects.
 SNMP Trap Community: Community string sent with the notification operation.

4.1.2 Ports

In Port Configuration, you can set and view the operation mode for each port.
 Enable Jumbo Frames: This switch provides more efficient throughput for large
sequential data transfers by supporting jumbo frames on Gigabit Ethernet ports
up to 12.2KB. Compared to standard Ethernet frames that run only up to 1.5 KB,
using jumbo frames significantly reduces the per-packet overhead required to
process protocol encapsulation fields.
 Power Saving Mode: Adjusts the power provided to ports based on the length of
the cable used to connect to other devices. Only sufficient power is used to
maintain connection requirements.
 Mode: Allows user to manually set the port speed such as Auto, 10 half, 10 Full,
100 Half, 100 Full, 1000 Full or Disabled. User may press Apply button to complete
the configuration procedure.
 Flow Control: Allows user to manually enable or disable the Flow Control feature.
Click the checkbox of the specific ports you and press Apply button to complete
the configuration procedure.
11
ES2446-51