Table of Contents
Advertisement
Programme default settings
en
0
Programme default
settings
P r o g r a
m m e
The spin speed and programme
duration ("Ready in" time) for all
programmes are preset at the factory.
These are displayed in the display panel
after selecting the programme.
You can change the default settings as
follows.
0 Spin speed
Before and while the selected
programme is running, the spin speed
or $ (without final spin, laundry soaks
in the last rinsing water, display panel - -
-) can be set. The effects depend on
the programme progress.
The maximum selectable spin speed
depends on the model and the set
programme.~ Page 12
5 Finished in
When you select the programme, the
relevant programme duration is
displayed.
The programme duration is
automatically adjusted when the
programme is running. Changes to the
programme default settings or
programme settings also change the
programme duration.
Before starting the programme, the
programme end ("Finished in" time) can
be preselected in increments of one
hour (h = hours) up to a maximum of 24
hours.
To do this, repeatedly press the
corresponding button until the required
setting is displayed.
The programme duration is
Note:
included in the selected "Finished in"
time.
14
t
d e f a u l
After the start, the preselected time e.g.
8 h is displayed and the time counts
down to the start of the washing
programme. The programme duration is
i n g s
s e t t
then displayed, e.g. 2:30
(hours:minutes).
Changing the preselected time:
You can change the preselected time
after the start of the programme as
follows:
Press the Finished in button
1.
repeatedly until the required number
of hours is displayed.
Press the Start/Reload button.
2.
Adding laundry while the preselected
time continues running:
Press Start/Reload.
1.
YES lights up in the display panel.
2.
The washing machine door can be
opened and you can add laundry.
Close the washing machine door.
3.
Press the Start/Reload button. The
4.
preselected time continues to run.
Advertisement
Table of Contents
