Subscribe to Our Youtube Channel
Related Manuals for Ercogener GenLoc 54e
Summary of Contents for Ercogener GenLoc 54e
- Page 1 User Guide GenLoc 54e EG_GenLoc54e_1040_UG_002_UK Reference : Revision : 002 Date : 18/04/2018 http://www.ercogener.com Dct_427_02...
- Page 2 The main modifications of this document compared to the previous version are easily identifiable on the screen by the blue color of the text. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
-
Page 3: Table Of Contents
Checking the communication with the modem ..............32 5.1.3.1 Without application ......................32 5.1.3.2 Standard library ....................... 33 5.1.3.3 The application ERCOGENER EaseLoc_Vx ..............34 Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... - Page 4 7.3.2.4 Indication of presence/absence of external power supply ......... 50 7.3.2.5 Instructions and restrictions of use ................51 Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
- Page 5 Consumption of GSM module on battery @ 25 °C ............66 8.2.2.9 Consumption of GPS module on battery @ 25 °C ............67 Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
- Page 6 ECURITY IN A VEHICLE ........................85 ARE AND MAINTENANCE ........................85 OUR RESPONSIBILITY RECOMMENDED ACCESSORIES ......................86 CUSTOMER SUPPORT ......................... 86 Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
- Page 7 Table 37 : Description of buzzer Output ......................61 Table 38 : Mechanical characteristics ......................63 Table 39 : Electrical characteristics ......................... 64 Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
- Page 8 Table 53 : Characteristics of Output for loudspeaker ..................69 Table 54 : Characteristics of buzzer output ..................... 70 Table 55 : Example of transducer tested with the GenLoc 54e............... 70 Table 56 : Characteristics of opto-coupled inputs ................... 71 Table 57 : Pin out of insulated inputs ......................
- Page 9 Figure 30 : Micro interface ..........................69 Figure 31 : Loudspeaker interface ........................69 Figure 32 : Example of transducer tested with the GenLoc 54e ..............70 Figure 33 : Internal electric scheme of the inputs .................... 71 Figure 34 : Internal electrical scheme of insulated inputs ................72 Figure 35 : Internal electric scheme of the output ...................
- Page 10 Figure 45 : Internal electrical scheme of the Power_Out ................82 Figure 46 : Drop of voltage ..........................82 Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
-
Page 11: Presentation
Page 11 / 86 Presentation Entirely dedicated to geo-localization and embedded data services, the modem GenLoc 54e combines the GSM / GPRS and GPS functions in the same robust casing. The GPS data can be transmitted by SMS or data GSM/GPRS communication. -
Page 12: Warning
- To avoid any risk of electrocution, do not open the casing. - For any functioning, the casing must be closed. - No internal part can be repaired by the user. The GenLoc 54e must be returned to the factory for any repair preceded by RMA request (Return Material Authorization). -
Page 13: Copyright
ERCOGENER reserves the right to revise or withdraw this document at any time and without notice. -
Page 14: References
1.1 Referred documents Commands List of Standard library of ERCOGENER ........: EG_EGM_CL_xxx_yy Embedded application EaseLoc of ERCOGENER .... : EG_EaseLoc_Vx_CL_yyy_UK Application Notes GenLoc 54e of ERCOGENER ....: EG_GenLoc54e_1040_AN_xxx_yy GSM reference documents: ● GSM 07.05. ● GSM 07.07. 1.2 Abbreviations... - Page 15 Typical Urban fading profile TUHigh Typical Urban, High speed fading profile Transmit TYPical Universal Time Clock VSWR Voltage Stationary Wave Ratio Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
-
Page 16: Symbols
- a 14-wire cable equipped with a 16-pin connector, with a Sub- D 9 pins and stripped wires. - a technical sheet (Instructions Sheet). Figure 1 : Content Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 17: Modem Packaging
If the internal battery option has been mounted during production, the modem has the following label: Lithium-Polymer Battery Inside. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 18: General Presentation
GSM antenna GPS antenna GSM LED GPS LED LED 3 LED 6 SIM card cover LED 4 LED 5 Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 19: Fixing Brackets
Fixing brackets 2 brackets to fix the modem on a support. Figure 4 : Back side Fixing brackets Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 20: External Connections
3.2.1.2 Micro FIT connectors Female Micro-FIT connector with 4 male pins: This connector of the GenLoc 54e is a connector for the DC external supply and the GPIOs (2 signals Input and Output). Figure 5 : 4-pin Micro-FIT connector Table 1 : 4-pin Micro-FIT connector Pin N°... -
Page 21: Table 2 : 14-Pin Μfit Connector
EG_GenLoc54e_1040_UG_002_UK Page 21 / 86 Female Micro-FIT connector with 14 male pins: This connector of the GenLoc 54e is a connector for the inputs, logical and analog outputs. Figure 6 : 14-pin Micro-FIT connector Table 2 : 14-pin µFit connector Pin N°... -
Page 22: Table 3 : 16-Pin Micro-Fit Connector
Page 22 / 86 Female Micro-FIT connector with 16 male pins: This connector of the GenLoc 54e is a connector for the serial links 0, 1, 2 or bus CAN (option) and control signal BOOT, RESET. Figure 7 : 16-pin Micro-FIT connector... -
Page 23: Audio Connector
EG_GenLoc54e_1040_UG_002_UK Page 23 / 86 3.2.1.3 Audio connector Connector RJ 9 4/4: This connector of the GenLoc 54e is a connector for a telephone handset. Figure 8 : Connector RJ9 audio Table 4 : Connector RJ9 audio Pin N° Signal... -
Page 24: Table 5 : Characteristics Of Power Supply Cable
Fuse reference: Mini Blade for automobile 2A - 32V (color code: grey) Figure 10 : Fuse Mini Blade Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 25: 14-Pin Micro-Fit Cable (Inputs/Outputs)
The 14-pins Micro-FIT cable (Inputs/Outputs) in your box can be delivered in 2 different color codes, Type 1 or Type 2 (new) Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 26: 14-Wire Micro-Fit Cable (Serial Links)
Component Characteristics 16-pin connector Length ≈ 1.5m Cable Wire Section : 0.5 mm² Sub D 9 pin Female Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 27: Table 9 : Wiring Of 14-Wire Serial Links Cable
White /Green RX_1 White /Blue POWER_OUT White RESET BOOT Black CTS_0 Brown RTS_0 Yellow TX_0 Green RX_0 Blue Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 28: 16-Pin Micro-Fit Cable (Serial Links, Boot And Reset)
Table 11 : Wiring of 16-wire serial link cable (Boot + Reset) Pin N° Signal Color Sub D 9 pin RESET Orange BOOT Green Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 29: Characteristics And Services
- AT commands: GSM 07.05 and 07.07 - Specific AT commands for GPS - SIM reader (SIM 3V – 1,8V) Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... - Page 30 * These options are an addition or a replacement of some existing options, contact us. (See § 7.2 Functional serial ports) Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
-
Page 31: Use Of The Modem
Figure 15 : Installation of the modem - Push the SIM card until hearing a "clic" that ensures its correct positioning. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 32: Checking The Communication With The Modem
5.1.3.1 Without application The GenLoc 54e does not contain any application; it will return the menu of the BootLoader. Connect the RS232 link between the DTE (COM port) and the modem (DCE). Set the RS232 port of the DTE as follows: ▪... -
Page 33: Standard Library
Page 33 / 86 5.1.3.2 Standard library The GenLoc 54e contains the standard library. Connect the RS232 link between the DTE (COM port) and the modem (DCE). Set the RS232 port of the DTE as follows: ▪ Bits per second: 115 200 bps, ▪... -
Page 34: The Application Ercogener Easeloc_Vx
Set the RS232 port of the DTE according to your parameters (speed, data bits, parity and stop bit). Use a communication software like Windows HyperTerminal ®. Check the display and the dialogue with the GenLoc 54e according to your own characteristics. 5.1.4... -
Page 35: Specific Recommendations For Use Of The Modem In Vehicles
EG_GenLoc54e_1040_UG_002_UK Page 35 / 86 5.2 Specific recommendations for use of the modem in vehicles The power supply connector of the modem GenLoc 54e must NEVER be connected directly to the battery of the vehicle. 5.2.1 Recommended connection on the battery of a truck All trucks have a circuit breaker outside the cabin. -
Page 36: Technical Constraints In Trucks
Moreover, the internal circuits of the modem are not designed to resist to a current of 60 A (during ignition of the truck), or they would be destroyed. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 37: Leds Of The Modem
The module is in communication data, voice or GPRS. 5.3.1.4 Owner application The GenLoc 54e contains your application. The led status depends on your parameters. 5.3.2 GPS led of the modem The positioning status of the modem is indicated by the status of the GREEN GPS LED situated on the back side of the modem. -
Page 38: Led 3
The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, if no echo is returned when entering an AT command, it means that: - the "local echo" of your communication software (like Hyperterminal) is not activated, - the echo function of the modem has been deactivated. -
Page 39: Checking The Quality Of The Gsm Reception Signal
5.5 Checking the quality of the GSM reception signal The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, the modem will be able to make a call only if the received GSM signal is powerful enough. -
Page 40: Verification Of The Pin Code
The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, the PIN code is essential in order to make a call or to accept a response coming from the GSM network. This code is held in the SIM card and can be modified by the user. -
Page 41: Verification Of The Modem Registration On The Gprs Network
The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, the reading of a GPS position can be done with the command AT+GPSPOS. This command allows to get the information received of the current position. After powering ON the modem, an acquisition time is necessary (around 45 seconds). - Page 42 (degree) 000 to 360 mm.mmmm (minute) 00,0000 to 59,9999 <nbre sat> : nn number of satellites seen Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
-
Page 43: Main At Commands (Hayes)
5.10 Main AT commands (HAYES) The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, the table below shows the main AT commands necessary for the control of the modem. Other AT commands are available, see the document "EG_EGM_CL_xxx_yy" of ERCOGENER. -
Page 44: Turning Off The Modem
5.11 Turning OFF the modem The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, it is strongly advised to un-register from the network with the command AT+COPS=2 There is no particular action to do on the GPS part before turning it OFF. -
Page 45: Modem Updating Procedure
Page 45 / 86 5.1 Modem updating procedure To be able to benefit from the latest functions of the GenLoc 54e, an updating procedure can be used to upgrade the software program in the modem. This procedure consists in downloading the software into the internal Flash memory of the modem via the RS232 link available on the 9-pin Sub 9 connector. -
Page 46: Error" Message
The modem returns a message "ERROR" (in response to an AT command) in the following cases: ▪ The COM port is not directed to the modem GenLoc 54e but to another modem. Enter ATI, and the response must be LEON-G100-06S-00. Any other response indicates a dialog with another modem. In this case, check the COM port used in the Hyperterminal. -
Page 47: Table 22 : Solutions When A Message "No Carrier" Is Returned
For more information about the error codes returned after having sent the command AT+CEER, see the document "EG_EGM_CL_xxx_yy" of ERCOGENER. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 48: Functional Description
Figure 18 : Functional architecture 7.2 Functional optional serial ports Contact us for configuration options. Figure 19 : Functional optional serial ports Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 49: Power Supply
7.3.2.1 Presentation of the internal battery The battery is fixed inside the GenLoc 54e. It is connected to an additional charging circuit cabled on the motherboard of the GenLoc 54e. This battery allows to maintain the GenLoc 54e functioning in case of absence of its external power supply (power supply connected on the Micro-FIT 4-pin female connector). -
Page 50: Specifications Of Internal Battery
7.3.2.2 Specifications of internal battery The external power supply of the GenLoc 54e remains unchanged (from +7,2V to 32V DC). The internal regulator of charge supplies the 4.2V voltage necessary for the battery charge. Table 23 : Characteristics of the polymer lithium battery Voltage (max.) -
Page 51: Instructions And Restrictions Of Use
The RS232 interface was designed to allow a certain flexibility in the use of the serial interface signals. In fact, after the setting (see command AT+IFC) if the GenLoc 54e contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER), in this case, the modem can work in 3-wire mode (using only the signals TX, RX, GND), but the use of the signals TX, RX, GND, CTS, RTS is required for a GPRS application. -
Page 52: Serial Link Rs232_0
TX data (CT103/TX_1) ......: Data transmission, RX data (CT104/RX_1) ....... : Data reception, Clear To Send (CT105/CTS_1) ..: Ready to send, Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 53: Serial Link K-Line (Iso 91141-2)
Table 27 : Description of pin K-Line 16-pin Micro FIT Signal connector Description Color of wire Pin N° Data of Digital K-Line White/Yellow Tachograph. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 54: Serial Link Rs232_2 / Can Bus
The data transmission is done on a differential wire pair. The line is then made of 2 wires, CANH ..: Positive differential line, CANL ..: Negative differential line. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 55: Table 29 : Description Of Pins Of Serial Link Can
Pin N° Positive differential CANH CAN High Purple line Negative differential CANL CAN Low White/Purple line Ground Black Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 56: Inputs/Outputs Functioning
Page 56 / 86 7.5 Inputs/Outputs functioning The GenLoc 54e provides five Inputs (opto-coupled) with 2 completely insulated, three Outputs (open collector) and two analog Inputs available for an external use. The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER);... -
Page 57: Management Of Logical Inputs
The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, these functions are controlled by AT commands. AT+GPIOGET This command is used to read the Inputs. By default, the inputs 1 to 5 are opto-coupled. To read: AT+GPIOGET=<n>... -
Page 58: Nd Sim Card Reader
This signal must be used only in case of emergency RESET. This signal must be driven with an open collector assembly: ● pin 10 (RESET) at 0, for the Reset of the GenLoc 54e, ● pin 10 (RESET) at 1, for normal mode. -
Page 59: Reset Sequence
To activate the emergency RESET sequence, the RESET signal must be put at a low level during at least 10 A soon as the modem has been RESET, if a SIM card is inserted inside the SIM reader of the GenLoc 54e you must wait for the end of the initialization before accessing it again. -
Page 60: Audio
7.10 Audio The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, the audio interface is standard to connect an equipment like a telephone handset. The echo cancelation (see command AT+UMGC) and noise reduction features are also available to improve the audio quality in the case of free-hand applications. -
Page 61: Buzzer Outputs
Page 61 / 86 7.10.3 Buzzer outputs By default, the GenLoc 54e provides a Buzzer output on the output 14 of the 14-pin connector. This PWM output type provides a frequency, it is dedicated to drive a Transducer. Table 37 : Description of buzzer Output... -
Page 62: Internal Processor
Page 62 / 86 7.13 Internal processor 7.13.1 EGM presentation The GenLoc 54e provides an ARM7 processor that allows to have an embedded application developed from the EGM libraries and based on eCos. The EGM libraries supplied by ERCOGENER contain the following elements: ●... -
Page 63: Technical Characteristics
The illustration below shows the dimensions of the modem including the clearances necessary for the installation of the modem. Figure 28 : Dimensions Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 64: Electrical Characteristics
The modem does not have any internal protection. For that, you must use the power supply cable provided with the modem which has this protection. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 65: Consumption
Average I Nominal Unit. 8.2.2.2 Consumption in Low Power mode @ 25 °C With EaseLoc V3.xx application, the command AT+LOCLOP=1,10 is send to the GenLoc 54e. Tableau 42 : Consumption in Low Power mode @ 25 °C Low Power Average I Nominal Unit. -
Page 66: Consumption Of Gps Module @ 25 °C
1900 MHz (P = 27.5 dBm typ.) The module is attached to network The module transmits at its maximum power. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 67: Consumption Of Gps Module On Battery @ 25 °C
The graph below indicates the maximum peak current. The power supply must be able to supply this current during the GSM and GPS "Burst". Figure 29 : Max consumption Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 68: Audio Interface
At 1 kHz. Impedance between kΩ Mic(+) to Mic(-) MICP and MICN. Internal discrete high-pass -3dB Differential MIC cutoff frequency Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 69: Loudspeaker
If not precised, the parameters are measured in the frequency band 20 Hz,...,20 kHz. Figure 31 : Loudspeaker interface Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 70: Buzzer
= 0; VCB = 10 V; f = 1 collector capacitance ≤ 25 °C total power dissipation Ttot * Pulse test: tp ≤ 300 μs; δ ≤ 0.02. Table 55 : Example of transducer tested with the GenLoc 54e Buzzer characteristics Values Type Transducer AT-2720-T-R Consumptions 1-30V peak/3.5mA max. -
Page 71: Inputs/Output
Figure 33 : Internal electric scheme of the inputs The minimum command voltage for the detection is: 3.5 V The maximum command voltage is: 35 V Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 72: Opto-Coupled Inputs Insulated
Control by putting to the Ground Table 57 : Pin out of insulated inputs Input pins pins E3 insulated E5 insulated Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 73: Outputs
No protection is provided. The user must respect the values of the table above. Figure 36 : Example of relay control Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 74: Analog Inputs
3 V ou 1.8 V Standard (mini SIM – 2FF) Format 8.2.6 Option 2 SIM interface Contact us. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 75: Reset Signal
Figure 38 : Wiring scheme of RESET signal The use of the RESET signal must pass through a transistor assembly or a logic contact. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 76: One Wire Bus
The integrator has the responsibility to protect the input from electrical perturbations and to respect the functioning parameters values Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 77: K-Line Compatible Input (Iso 91141-2)
Page 77 / 86 8.2.9 K-Line compatible input (ISO 91141-2) The GenLoc 54e is designed to be connected to a Digital Tachograph. (Connector D8 of the Digital Tachograph). This signal is managed by the embedded ARM application. This feature is only in receive mode. -
Page 78: Characteristics Of The Rs232 Serial Links
Maximum power (Power Class4 - 1800/1900) at 30 dBm +/- 2 dB @ antenna connection room temperature Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 79: Gsm External Antenna
Dependent on aiding data connection speed and latency Demonstrated with a good active antenna Under good GPS signal conditions Assuming Airborne <4g platform Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 80: Gps External Antenna
Figure 44 : Installation of GPS antenna not recommended This installation does not prevent the functioning of the GPS but highly reduces its performances. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 81: Characteristics Of The Accelerometer
Without power supply 3.55 With power supply 7.2V - 32V Max. The GenLoc 54e works with its battery only. In the case where the voltage V falls below 3.55 V , the product cannot communicate anymore via the network. In the case where the software management of the battery guarantees that the voltage V does not fall below 3.55 V... -
Page 82: Figure 45 : Internal Electrical Scheme Of The Power_Out
Below the graph of voltage drop due to the serial diode and the transistor. Figure 46 : Drop of voltage Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 83: Option Power Supply 100V
Above 45 °C inside the box, the protection of the battery management triggers. The battery will not be charged. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 84: Security Recommendations
▪ The modem must be used at more than 20cm from the human body. This equipment is supplied in Very Low Security Voltage and at non-dangerous energy level. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 85: Security In A Vehicle
Do not place the modem next to computer disks, credit or travel cards or other magnetic supports. The information contained on disks or cards can be affected by the modem. The use of other equipments or accessories not made or not authorized by ERCOGENER can cancel the guarantee of the modem. -
Page 86: Recommended Accessories
EG_GenLoc54e_1040_UG_002_UK Page 86 / 86 10 Recommended accessories The accessories recommended by ERCOGENER for the modem GenLoc 54e are described on our website in the section Products/Accessories. For more information, contact our sales department. 11 Customer support ERCOGENER ensures the customer support for all its modems sold. You will then have access to:...
Need help?
Do you have a question about the GenLoc 54e and is the answer not in the manual?
Questions and answers