Subscribe to Our Youtube Channel
Related Manuals for Ercogener GenLoc 41e
Summary of Contents for Ercogener GenLoc 41e
- Page 1 User Guide GenLoc 41e EG_GenLoc41e_1055_UG_003_UK Reference : Revision : Date : 18/05/2018 http://www.ercogener.com Dct_427_02...
- Page 2 The main modifications of this document compared to the previous version are easily identifiable on a screen by the blue color of the text. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
-
Page 3: Table Of Contents
ROBLEM OF COMMUNICATION BETWEEN THE MODEM AND THE LINK 6.2 "ERROR" ............................ 34 MESSAGE 6.3 "NO CARRIER" ........................... 35 MESSAGE Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... - Page 4 8.2.12 Bus I2C (Option) .......................... 67 8.3 E ......................68 NVIRONMENTAL CHARACTERISTICS 8.4 S ......................... 68 TANDARDS ONFORMITIES Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
- Page 5 ARE AND MAINTENANCE 9.4 Y ..........................70 OUR RESPONSIBILITY 10 RECOMMENDED ACCESSORIES ......................71 11 CLIENT SUPPORT ............................ 71 Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
-
Page 6: Presentation
Page 6 / 71 Presentation Entirely dedicated to geo-localization and embedded data services, the modem GenLoc 41e combines both GSM/GPRS and GPS functions in the same robust case. The GPS data can be transmitted by SMS or data GSM/GPRS communication. -
Page 7: Warning
- In order to avoid any risk of electrocution, do not open the casing. - For any functioning, the casing must be closed. - No internal part can be repaired by the user. The GenLoc 41e must be returned to the factory for any repair the RMA request (Return Material Authorization). -
Page 8: Copyright
ERCOGENER reserves the right to revise or withdraw this document at any time and without previous notice. -
Page 9: References
1.1 Referred documents Commands List of Standard library of ERCOGENER ........: EG_EGM_CL_xxx_yy the embedded application EaseLoc of ERCOGENER ..: EG_EaseLoc_01_CL_xxx_yy Application Notes GenLoc 41e of ERCOGENER ......: EG_GenLoc41e_1055_AN_xxx_yy GSM reference documents: 3GPP TS 27.007 Technical Specification Group Core Network and Terminals; AT command set for User Equipment (UE) ... - Page 10 Transmission Control Protocol / Internet Protocol TDMA Time Division Multiple Access Typical Urban fading profile TUHigh Typical Urban, High speed fading profile Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
-
Page 11: Symbols
Red/Black /Yellow/Brown stripped with fuse mini Blade 2A/32V - A 2-wire cable (Blue/Yellow) stripped. - A technical sheet (Instructions Sheet). Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 12: Packaging
If the internal battery option has been mounted during production, the modem has the following label: Lithium-Polymer Battery Inside. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 13: General Presentation
EG_GenLoc41e_1055_UG_003_UK Page 13 / 71 3 General Presentation 3.1 Description Description of the modem GenLoc 41e : Front side Connector Connector Micro-Fit 4pts/M Micro-Fit 2pts/M Connector Sub HD 15pts/F Back side Connector FAKRA-C GPS Antenna Connector FAKRA-D GPS LED GSM Antenna... -
Page 14: External Connections
The GPS antenna connector is FAKRA-C male with a 50Ω impedance. 3.2.1.2 Micro FIT connectors Female Micro FIT Connector with 4 male pins: This connector of the GenLoc 41e is used for the external DC supply and the GPIOs (the 2 signals Input and Output). Pin N°... -
Page 15: 15-Pin Sub D Hd Connector
3.3 - 4.2 V / 100 mA with battery option. (wiring of the output 125/RI optional). Contact us Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 16: Cables
Wire Tinned copper 24 x 0.2 mm Section : 0.75 mm² mini N 2A 32V RAPIDE Fuse (grey) Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 17: 2-Wire Micro Fit Cable
Component Characteristics 2-pin Micro FIT connector Supplier : MOLEX Length ≈ 1.5m Cable Wire Section : 0.5 mm² Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 18: Characteristics And Services
- 3 opto-coupled Inputs and 1 open-collector Output - External auto-supply via pin RI - Buzzer output via pin DCD Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 19: Using The Modem
0V of the RS232 serial link. To avoid any risk of conduction of the ground plane to other equipments, the modem must be electrically insulated from its mechanical support. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 20: Installation Of The Modem
- The application ERCOGENER EaseLoc-Vx. - The owner application. We may obtain different display. See the following paragraph. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 21: Checking The Communication With The Modem
5.1.3 Checking the communication with the modem 5.1.3.1 Without Library The GenLoc 41e does not contain any library, it will return the menu of the Bootloader. Connect the link RS232 between the DTE (the COM port) and the modem (DCE). -
Page 22: With Egm Standard Library
Set the RS232 port of the DTE according to your parameters (speed, data bits, parity and stop bit). Use a communication software like Windows HyperTerminal ®. Check the display and the dialogue with the GenLoc 41e according to your own characteristics. Descriptions and non-contractual illustrations in this document are given as an indication only. -
Page 23: Sim Card Extraction
For more details concerning the modem RESET, see the § 7.6 RESET 5.2 Specific recommendations for the use of the modem in vehicles The power supply connector of the modem GenLoc 41e must NOT be connected directly to the battery of the vehicle. -
Page 24: Recommended Connection On The Battery Of A Truck
(to the ground of the truck or in the fuse box). Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 25: Technical Constraints In Trucks
Moreover, the internal circuits of the modem are not designed to resist to a current of about 60 A (when starting the truck), or they would be destroyed. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 26: Gsm Led
Module in data, voice or GPRS communication. 5.3.1.4 The owner application The GenLoc 41e contains your application. The led status depends on your parameters. 5.3.2 GPS led The positioning status of the modem is indicated by the GREEN GPS LED situated on the back side of the Description modem. -
Page 27: Echo Function Of At Commands Deactivated
5.5 Checking the quality of the GSM reception signal The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER) in this case, the modem will be able to make a call only if the received GSM signal is sufficient. -
Page 28: Verification Of The Pin Code
The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, the PIN code is necessary to make a call or to accept a response coming from the GSM network. This code is held in the SIM card and can be modified by the user. -
Page 29: Verification Of The Modem Registration On The Gsm Network
The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, the reading of a GPS position can be done with the command AT+GPSPOS. This command allows to get the information received of the current position. After powering on the modem, an acquisition time is necessary (around 45 seconds). - Page 30 A position is read and all the information is +GPSPOS:2,083205,180406,4716.81310N,0 available. 0003.51202W,44.9,2.14,0.037,33.43,10 The frame is considered as complete. The GPS LED is flashing. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
-
Page 31: Main At Commands (Hayes)
5.9 Main AT commands (HAYES) The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, the table below shows the main AT commands necessary for the control of the modem. Other AT commands are available, see the document "EG_EGM_CL_xxx_yy" of ERCOGENER. -
Page 32: Turning Off The Modem
5.11 Updating procedure of the modem To be able to benefit from the latest functions of the GenLoc 41e, an updating procedure can be used to upgrade the software program in the modem. This procedure consists in downloading the software into the internal Flash memory of the modem via the RS232 link available on the 15-pin Sub HD connector. -
Page 33: Trouble Shooting
Is the modem without echo and Send the command ATE1Q0 followed by AT&W without message reporting? if a backup is required . Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 34: Error" Message
The modem returns a message "ERROR" (in response to an AT command) in the following cases: ▪ The COM port is not directed to the modem GenLoc 41e but to another modem. Enter ATI0, and the response must be "LEON-G100-xxx-yy". Any other response indicates a dialog with another modem. -
Page 35: Carrier" Message
For more information about the error codes returned after having sent the command AT+CEER, see the document "EG_EGM_CL_xxx_yy" of ERCOGENER. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 36: Functional Description
) falls below 6.5 V or 7.2 V depending on the presence of the battery option or not. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 37: Internal Battery Option
7.2.2 Internal battery option 7.2.2.1 Presentation of internal battery option The battery is fixed inside the GenLoc 41e. It is connected to an additional charging circuit cabled on the mother board of the GenLoc 41e. This battery allows to maintain the GenLoc 41e functioning in case of absence of its external power supply (power supply connected on the Micro-FIT 4-pin female connector). -
Page 38: Charge Voltage And Supply Voltage
7.2.2.4 Indication of presence/absence of the external power supply The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, the command AT+GPIOGET=27 allows to know the status of the external power supply for the internal battery. -
Page 39: Instruction And Restrictions Of Use
The RS232 interface is internally protected (ESD protection) against electrostatic peaks coming from the RS232. Filter guarantees: following certification CE. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 40: Pins Description
CDCD/CT109 Buzzer output (1*) Power supply 3.8V CRI/CT125 (1*) Data signal I2C CT102/GND Ground (TWD) (1*) By default Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 41: Output +3.8V
When the battery is not connected, the output voltage is de 4.4V ≤ Vout ≤ 4.5 V as long as the power supply +V is present Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 42: Inputs/Outputs Functioning
7.4 Inputs/Outputs functioning The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, the modem GenLoc 41e provides 3 inputs (opto-coupled) and 1 output (open collector) available for an external use. These functions can be controlled by AT commands: AT+GPIOSET for a writing access to a GPIO with the GPIO used as an output, AT+GPIOGET for a reading access to the GPIO with the GPIO used as an input. -
Page 43: Boot
Using the RESET does not restore the factory parameters. For more information about the Software RESET, see the document "EG_EGM_CL_xxx_yy" of ERCOGENER and see paragraph 5.10 and detach it correctly from the operator network. 7.6.2 RESET sequence To activate the emergency RESET sequence, the RESET signal must be put to a low level during at least 10 As soon as the modem has been RESET, if a SIM card is inserted inside the SIM reader, you must wait for the end of the initialization before accessing it again. -
Page 44: Watchdog
The audio interface is standard to connect a telephone handset (the command AT+UHFP allows the Handset selection, see the document "EG_EGM_CL_xxx_yy" of ERCOGENER). ERCOGENER advises the use of the cable DATA/AUDIO Sub D 9pts Fem / Sub HD 15pts Male / RJ9 (order code 4404000205) and a telephone handset (order code 3153400000). -
Page 45: Microphone Inputs
The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, by default, the GenLoc 41e provides a Buzzer output on output 1 (instead of the DCD) of the 15-pin Sub-D connector. This output provides a PWM output, and is used to drive a Transducer. -
Page 46: Gps Module
The modem contains the EGM standard library (see the documents "EG_EGM_CL_xxx_yy" of ERCOGENER); in this case, it is possible to use directly the GPS frames via the RS232 (V24). In this case, the internal analog switch allows to transfer the transmission and reception signals of the GPS module directly to the RS232 serial link. -
Page 47: Internal Processor
7.11 Internal processor 7.11.1 EGM presentation The GenLoc 41e has an ARM7 processor that allows to have an embedded application developed from the EGM libraries and based upon eCos. The EGM libraries supplied by ERCO &GENER contain the following elements: ●... -
Page 48: Technical Characteristics
The illustration below shows the dimensions of the modem including the clearances necessary for the installation of the modem. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 49: Electrical Characteristics
The power supply consumption may vary by 5% depending on the temperature range (-20 °C to +55 °C). Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... - Page 50 Power Save mode Peak current 15,6 12,8 Typically : 12 mn after the coldstart 15 s after the Hot start Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
- Page 51 Tableau : Active antenna consumption GPS on battery @ 25 °C Active antenna I Nominal average Unit. batterie de 10 mA de 20 mA Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02...
-
Page 52: Max Consumption
AT+UMGC: Microphone Gain Control AT+USGC: Speaker Gain Control AT+USTN: Sidetone AT+USPM: Audio Path mode setting AT+USTN: Sidetone Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 53: Microphone
Internal discrete high-pass -3dB Differential MIC cutoff frequency Component Value C1, C2, C3 CAPACITOR 22pF L1, L2 Inductance 82nH Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 54: Loudspeaker
If not precised, the parameters are measured in the frequency band 20 Hz,...,20 kHz. Component Value C1, C2, C3 CAPACITOR 22pF Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 55: Buzzer
= 0; VCB = 10 V; f = 1 collector capacitance ≤ 25 °C total power dissipation Ttot * Pulse test: tp ≤ 300 μs; δ ≤ 0.02. Example of transducer tested with the GenLoc 41e: Buzzer characteristics Values Type Transducer AT-2720-T-R Consumption 1-30V peak/3.5mA max. -
Page 56: Inputs/Output
Page 56 / 71 8.2.4 Inputs/Output By default, the GenLoc 41e provides 3 opto-coupled inputs (I1 to I3) and 1 open-collector output (O1). As an option, it is possible to have an analog input instead of the opto-coupled input I2. -
Page 57: Open Collector Output (O1)
Electric scheme of the output No protection is provided. The user must respect the values of the table above. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 58: Analog Input - Ana1 (0 - 10V) On Input2
≤ 32V Conversion range 0.010 10.33 Polarization current De 10 mV à 10.33 V 1.34 µA Resolution bits Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 59: Input/Output (0 - 3.3 V) Direct On Input2, Input3
8.2.4.5 Input/Output (0 – 3.3 V) direct on INPUT2, INPUT3 As an option on the GenLoc 41e, it is possible to have 3.3V input directly connected to the ARM. (Contact us). These Input/Output INPUT2, INPUT3 are directly connected on the ARM : INPUT2 on Port PA1 and INPUT3 on port PA2. -
Page 60: Bus One Wire (0 - 3.3V) On Input3
8.2.4.6 Bus One Wire (0 - 3.3V) on INPUT3 As an option on the GenLoc 41e, it is possible to have an input Bus One Wire instead of the opto-coupled input I3. The bus is managed by the ARM. -
Page 61: Bus One Wire (0 - 3.3V) Multi-Salves Dallas On Input3
Page 61 / 71 8.2.4.7 Bus One Wire (0 - 3.3V) multi-salves Dallas on INPUT3 As an option on the GenLoc 41e, it is possible to have an input Bus One Wire multi slaves instead of the opto-coupled input E3. -
Page 62: Sim Interface
Maximum power (Power Class1 - 1800/1900) 30 dBm +/- 2 dB @ antenna connection at ambient temperature Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 63: Gsm External Antenna
< 3:1 acceptable Return Loss <-10 dB recommended <-6 dB acceptable See § 10 , for the GSM antennas recommended by ERCOGENER. 8.2.8 GPS characteristics 8.2.8.1 GPS functioning The GPS performances are described in the table below. Table: GPS parameters... -
Page 64: Gps External Antenna
Power supply current (max) 50mA See § 10 , for the GPS antennas recommended by ERCOGENER. 8.2.8.3 Installation of the GPS external antenna The quality of the GPS signal received depends on the quality of installation of the antenna. To obtain an optimal signal, some rules have to be respected: ▪... -
Page 65: Characteristics Of The Accelerometer
EG_GenLoc41e_1055_UG_003_UK Page 65 / 71 8.2.9 Characteristics of the accelerometer As an option on the GenLoc 41e, it is possible to have an accelerometer. (Contact us). Table: Characteristics of the accelerometer Dynamic ± 2g or ± 8g driven by software... -
Page 66: On/Off Commande Of The Power Supply
EG_GenLoc41e_1055_UG_003_UK Page 66 / 71 8.2.11 ON/OFF commande of the power supply As an option on the GenLoc 41e, it is possible to have an input to put equipment in low power. (Contact us). Table: Characteristics of the transistor Characteristics Symbols Conditions @ 25°C... -
Page 67: Bus I2C (Option)
LEAK Input capacitance Output Low-level Voltage Output High-level Voltage Output Current Internal electric scheme of the bus I2C Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 68: Environmental Characteristics
- ROHS Compliant : Directive 2002/95/CE - "REACH" - 2002/96/CE DEEE (Crossed-out wheelie bin). The following marking appears under the device. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 69: Security Recommendations
▪ The modem must be used at more than 20cm from the human body. This equipment is supplied in Very Low Security Voltage and at non-dangerous energy level. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modifications. Dct_427_02... -
Page 70: Security In A Vehicle
Do not place the modem next to computer disks, credit or travel cards or other magnetic supports. The information contained on disks or cards can be affected by the modem. The use of other equipments or accessories not made or not authorized by ERCOGENER can cancel the guarantee of the modem. -
Page 71: Recommended Accessories
EG_GenLoc41e_1055_UG_003_UK Page 71 / 71 10 Recommended Accessories The accessories recommended by ERCOGENER for the modem GenLoc 41e are described on our website in the section Products/Accessories. For more information, contact our sales department. 11 Client support ERCOGENER ensures the client support for all its modems sold. You will then have access to:...
Need help?
Do you have a question about the GenLoc 41e and is the answer not in the manual?
Questions and answers