Subscribe to Our Youtube Channel
Related Manuals for Ercogener EG-IoT Series
Summary of Contents for Ercogener EG-IoT Series
- Page 1 User Guide EG-IoT-xxxx Reference : EG-IoT_1114_UG_010_UK.docx http://www.ercogener.com Dct_427_02...
- Page 2 The main modifications in this document compared to its previous version are easily identifiable by the blue color of the text. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02...
-
Page 3: Table Of Contents
ANNEX 5 – MOUNTING WITH SPECIFIC CLIP .................... 19 ANNEX 6 – RADIO COMMUNICATION ......................20 ANNEX 7 – APPROVALS ..........................20 Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... -
Page 4: Warning
Sigfox networks - Dysfunctions if the product is used for the monitoring of physical persons where human life is at stake. ERCOGENER reserves the right to modify the functionalities of its products "EG-IoT xxxx" without prior notice. - When the equipment is open, do not carry out any operations other than those provided for in this document. -
Page 5: Copyright
ERCOGENER reserves the right to revise this document or withdraw it at any time without notice. -
Page 6: Presentation Of The Products
800/850 900/1900 2100 MHz 850/900 1800/1900 MHz Bat. Rechargeable 1 A.h 3.7Vdc LTE-M1 800/1800 MHz GNSS GPS / GLONASS open collector Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... -
Page 7: Technical Characteristics
Internal temperature sensor Temperature sensor characteristics Specifications Measurement range -40 °C to + 85 °C Resolution 1 °C Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... -
Page 8: Packaging
Fix bracket mounting Clip Clip 410A000004 Ref. ercogener K014 Clip + tool K19 (see annexes for more détails) Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... -
Page 9: Installation, Optimum Mounting
2 – Optional. Stick the adhesive tape to the bottom of the M8 connector. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... -
Page 10: Installation Of Sim Card
If the power is disconnected, the product loses the date and time, the timestamp of frames and the Keep Alive function will be corrupted until it is set to the next time Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... -
Page 11: Replacement Of Battery
Product opening. Observe handling precautions for products sensitive to electrostatic discharge (ESD). Use only batteries supplied by ercogener. Contact us. Keep the battery away from fire, do not try to charge it or short-circuit it. Dispose of old batteries according to the usual instructions. -
Page 12: Closing The Casing
6 – With the TORX T10 screwdriver, place the 4 screws under the housing. Once the screws stop, make an additional quarter turn to ensure the waterproofness. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... -
Page 13: Local Configuration Via Internal Serial Link
EG-IoT_1114_UG_010_UK.docx Page 13 / 20 9 Local configuration via internal serial link Only use the USB/TTL cable from ercogener (Ref. 4440Z00025). Product opening. Observe handling precautions for products sensitive to electrostatic discharge (ESD). 1 – Carefully separate the upper part from the lower part, using as the rotation axis the opposite side of the M8 connector. -
Page 14: Update Of Embedded Software Via Boot Loader
To finalise the configuration, see the document specific to the EaseEG-IoT software. 10 Update of embedded software via Boot loader Get the software update pack provided exclusively by ercogener and containing: • The new binary file for the EaseEG-IoT application •... -
Page 15: Annex 1 - 8-Wire Cable
AWG26 / 0.14 mm Minimum bending radius, fixed installation 25.5 mm Minimum bending radius, flexible installation 51 mm Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... -
Page 16: Annex 2 - Interface On M8 Connector
Current max. à V . ± 30V ± 3.6 Command voltage ± 3.5 ± 30 Idle voltage ± 2 Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... - Page 17 Power supply of EG-IoT on a vehicle 12V or 24V: add a series 2.5A fuse. On vehicle 24V: add a series diode 2A 600V on the ground. Type GPP20J or equivalent. Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02...
-
Page 18: Annex 3 - Din Rail Mounting
Fix the bracket on the EG-IoT Fix all on the wall Fix the assembly on the support Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... -
Page 19: Annex 5 - Mounting With Specific Clip
(Unlocking 4 anchor points). Spread the 2 side lugs (2 anchors remaining) and remove the case Descriptions and non-contractual illustrations in this document are given as an indication only. ERCOGENER reserves the right to make any modification. Dct_427_02... -
Page 20: Annex 6 - Radio Communication
2500 MHz ANNEX 7 – APPROVALS EU declaration of conformity ercogener declares that radio equipment EG-IoT-xxxx complies with Directive 2014/53 / EU. (RED). The full text of the EU declaration of conformity is available at www.ercogener.com/ Descriptions and non-contractual illustrations in this document are given as an indication only.
Need help?
Do you have a question about the EG-IoT Series and is the answer not in the manual?
Questions and answers