Acer CB273U User Manual page 28

Audio
Picture Volume
Color Mute
Audio
Pertormance
OSD
System
Save Settings to...
Move
Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Audio from the OSD.Then toggle to the
right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Volume: Adjust the volume
5. Mute:To choose
Performance
Picture Over Drive
Color
AMD FreeSync
Audio
Refresh Rate Num
Pertormance
VRB
OSD
Ultra-Low Latency
System
Save Settings to...
Move Enter
1. Press the MENU key to open the OSD.
2. Toggle the joystick to the up or down to select Gaming from the OSD.Then toggle to
the right to navigate to the element you wish to adjust and press the joystick to enter it.
3. Toggle to the left or right to adjust the sliding scales.
4. Over Drive: Select Off, Normal or Extreme.
5. AMD FreeSync: To control support AMD FreeSync or not, default is On.
-----------------------------------------------------------------------------------------------------------
Note: If AMD FreeSync is "ON", then the Over Drive selection is set to "Normal"
automatically.
If AMD FreeSync is "OFF", then the user can set Over Drive to either one of the
three settings including: (a) Extreme (b) Normal (c) Off.
6. Refresh rate num: Display the panel's current refresh rate on the screen.
-----------------------------------------------------------------------------------------------------------
Note: If AMD FreeSync set "On" you can see the V Frequency to changes in the
OSD.
Mode - Stardard
Off
mute on/off .
Mode - Standard
Normal
On
Off
Off
On
Exit
70
X
X