Acer CB273U User Manual page 23

Using the Shortcut Menu
-------------------------------------------------------------------------------------------------------------
Note: The following content is for general reference only. Actual product specifications
may vary.
The OSD (onscreen display) can be used to adjust the settings of your LCD monitor. Press
the MENU key to open the OSD. You can use the OSD to adjust the picture quality and
general settings. For advanced settings, please refer to following page:
Main page
Mode
Standard
Brightness
70
Input
HDMI(2.0)
Menu
Hot key1 (default: Standard mode)
To choose scenario mode(sRGB,Rec.709,HDR,User, Standard, ECO, Graphics, Movie)
2
1
sRGB Rec.709
Standard ECO
Move OK
Hot key2 (default: Brightness)
Open the Brightness control and select your preferred brightness setting . When you are
done, press the joystick to quit current page and store.
Brightness
Adjust OK
1. Hot Key1
Contrast, Low Blue Light, Over Drive)
2. Hot Key2 (Modes, Volume, Brightness,Gamma,
Contrast, Low Blue Light, Over Drive)
3. Input selection
4. Menu OSD
Modes
3
HDR User
Graphics Movie
70
(Modes, Volume, Brightness,Gamma,
23