Cms Series Model Dimensions - Tannoy CMS 3.0 Series Quick Start Manual

110 CMS 3.0 Series
Painting
If desired, the grille and baffle panel may be painted to match the surrounding décor.
Painting the baffle:
• Carefully mask off the driver assembly using the paint mask provided to ensure that the paint does not come into contact with the cone and roll surround.
• Apply several thin coats of paint – this will provide a better finish than one overly thick coat.
Painting the grille:
• Carefully remove the acoustically transparent grille cloth from the reverse side of the grille.
• Paint the grille and then replace the grille cloth - several thin coats of paint will provide a better finish than one overly thick coat.
• Re-bond the grille cloth to the grille over the entire area using a light spray-adhesive to avoid audible resonances.

CMS Series Model Dimensions

CMS 803DC BM
Hole Cut-out Size: 295 mm
Tamaño de corte del orificio: 295 mm
Taille de la découpe du trou: 295 mm
Lochausschnitt Größe: 295 mm
Tamanho do recorte do furo: 295 mm
Dimensione del ritaglio del foro: 295 mm
Gat uitgesneden grootte: 295 mm
Hålsskuren storlek: 295 mm
Rozmiar wycięcia w otworze: 295 mm
327.7
310.5
[12.90"]
[12.22"]
5.2
[0.20"]
319.0
286.4
[12.56"] [11.27"]
CMS 803DC PI
Hole Cut-out Size: 295 mm
Tamaño de corte del orificio: 295 mm
Taille de la découpe du trou: 295 mm
Lochausschnitt Größe: 295 mm
Tamanho do recorte do furo: 295 mm
Dimensione del ritaglio del foro: 295 mm
Gat uitgesneden grootte: 295 mm
Hålsskuren storlek: 295 mm
Rozmiar wycięcia w otworze: 295 mm
125.6
[4.94"]
5.2
[0.20"]
286.4
319.0
[11.27"]
[12.56"]
Quick Start Guide 111