Advertisement
USER MANUAL: Laserworld Ecoline EL-60G
2. OPERATING DETERMINATIONS
6. The operator has to make sure that laser radiation – also reflected laser
radiation –higher than the highest allowed level is avoided by technical or
organisational measures.
7. Make sure that the used voltage is : AC 220V~240V, 50/60Hz
8. If the device is used in a flying installation, the mounting brackets and an
appropriate safety-rope must be fixed.
9. Laser effects are not designed for permanent operation. Consistent operation
breaks will ensure that the device will serve you for a long time without
defects.
10. In some countries, the operator must notify the accidence insurance and the
authority for industrial safety, before operating a laser. For more information,
contact the relevant authorities.
11. Please consider that unauthorized modifications on the device are forbidden
due to safety reasons!
12. If this device will be operated in any way differently than described in this
manual, the product may suffer damages and the guarantee becomes void.
Furthermore, any other operation may lead to dangers like short-circuit,
burns, electric shock, etc.
3. OPERATION
Connect the power cable to the mains and turn on the power switch, now the device
is in the stand-alone-mode. You can control the music-sensitivity of the microphone
with the min-max knob at the rear panel
Page 4 of 6
Date: 01/2008
Advertisement
