Download Print this page

Advertisement

EL-400RGY
USER MANUAL
Please read this manual carefully before use!

Advertisement

loading

Summary of Contents for Laserworld EL-400RGY

  • Page 1 EL-400RGY USER MANUAL Please read this manual carefully before use!
  • Page 2: Table Of Contents

    USER MANUAL: Laserworld Ecoline EL-400RGY Page 2 of 8 Table of contents Page 1. SAFETY INSTRUCTIONS 2. OPERATING DETERMINATIONS 3. AUTO- MUSIC-MODE 4. OPERATION WITH DMX 5. DMX CHANNELS 6. MAINTENANCE 7. TECHNICAL SPECIFICATIONS Checking Parts Please check if the following parts are included:...
  • Page 3: Safety Instructions

    USER MANUAL: Laserworld Ecoline EL-400RGY Page 3 of 8 DANGER LASER RADIATION! Avoid direct eye exposure! Laser radiation can cause eye damage and/or skin damage All protective measures for a safe operation of this laser must be applied. 1. SAFETY INSTRUCTIONS If the device has been exposed to drastic temperature fluctuation, do not switch it on immediately.
  • Page 4: Operating Determinations

    USER MANUAL: Laserworld Ecoline EL-400RGY Page 4 of 8 2. OPERATING DETERMINATIONS 6. The operator has to make sure that laser radiation – also reflected laser radiation –higher than the highest allowed level is avoided by technical or organisational measures.
  • Page 5: Auto- Music-Mode

    USER MANUAL: Laserworld Ecoline EL-400RGY Page 5 of 8 3. AUTO- MUSIC-MODE If you put switch 10 to “ON” the patterns will change triggered by sound (sound or music mode). You can control the music-sensitivity of the microphone with the min- max knob on the rear panel.
  • Page 6: Dmx Channels

    USER MANUAL: Laserworld Ecoline EL-400RGY Page 6 of 8 5. DMX CHANNELS The DMX channels are set as following: channel Function Mode: 0-69 laser off; 70-209 sound mode (see above); 210-255 DMX mode Pattern Effect channel: Strobe Effect channel: Point speed...
  • Page 7: Maintenance

    Laserworld cannot be made liable for damages caused by incorrect installations and unskilled operation!
  • Page 8 After installing the device, an inspection and official approval is indispensable for the overall setup. The inspection must follow the european guidelines EN 60825-1 and corresponding regulations for the prevention of accidents BGV-B2. This declaration is executed on behalf of the EL-400RGY DMX Laser manufacturer. Laserworld (Switzerland) AG Oberstrasse 1 8274 Tägerwilen...