Current SERENE 13G Quick Start Manual

STEP 1: Cabinet & Aquarium Installation
IMPORTANT LOCATION INFORMATION!
Follow leveling instructions below (it will save
you a lot of work!)
Ensure floor is level and can support a minimum
of 425 lbs./square inch.
Avoid locations near AC/Heating vents or facing
direct sunlight.
Ensure the power outlet used with your aquarium
is a 120VAC GFCI outlet and rated for 750 watts.
2
Allow a minimum 3.5" from wall for background
light installation and aquarium maintenance.
Turn the feet clockwise to raise,
counter-clockwise to lower.
4
Adjust cabinet leveling feet if needed.
6
Place level on glass aquarium edge and confirm
aquarium system is level. Adjust leveling feet
if required.
SERENE AQUARIUM - QUICK START GUIDE
1
Place aquarium cabinet in desired location.
3
Use included leveling device and place on
cabinet top to ensure stand is level.
5
Carefully place aquarium on stand.
7
Slide filter tube clips out from under cabinet.
LEVEL = Bubble between two lines