– user manual introduction Grandinote congratulates with you for the excellent choice done, buying this exclusive amplifier, masterpiece of style and technology. You listened the extraordinary musical caracteristics of “Magnetosolid®” amplifiers: neutral tone, rich details and harmonics, high speed, big extension, big tight..
Full dual mono Weight 40kg W=318 x H=196 x L=473 [mm] Voltage power supply 230V Absorption 270W Magnetosolid® Technology note: These specifications will can change without the obligation to report, by Grandinote. Pag. 4 di 15...
Page 5
– user manual w arnings For the correct and sure use of this product, Grandinote recommends the study and the application of this warning list. Don't open the device. Don't turn off and turn on quickly the device.
– user manual Connections - Rear Panel In the picture 2, we see the device's input-output connectors. We have 4 balanced inputs, in1, in2, in3 and in4, they are XLR (full balanced). In the lower right and left of the picture we see the IEC connectors for the power supply, with their protection fuses.
– user manual Front panel In the picture 3, we see the device's front panel. The display is in the middle of panel, below it the power supply switch. (Don't turn off and turn on quickly the device) To the sides of display we see six buttons for the total control to the device.
– user manual Remote control In the picture 4, we see the device's remote control. In the top left: input increase In the down left: input decrease In the top right: volume increase In the middle right: mute management ...
Page 9
– user manual settings Going in program settings, it will be possible to personalize some functions. To start program setting, press PRG key. The display visualize the first setting. Press PRG again, for to confirm and pass to the second setting, until the last setting.
– user manual Input's Volume The first 4 settings are for correlate a volume level to every input. If volume level 20 is correlated to input 3, every time the input become 3, the device slowly increases the volume, arriving to 20.
– user manual black display This function is for the turn off the display in automatic, if the display don't changes for some seconds. When the utente press a button, the display turns on. So, when the display don't will change again, the display will turn off again.
Page 12
– user manual Balance Balance is for different level of volume between the two channels. Press PRG, to visualize on the display: The up rappresentation is for the same level for the two channels: the balance is totally excluded.
– user manual Remote control off This setting excludes the remote control reception. Press PRG, to visualize on the display "TELE" write: By IN+ and IN- keys on change the “ON” / “OF” status. The next pres on PRG key confirms and leads to the next setting.
Page 14
– user manual Trasform the input one in line output This setting switchs the XLR connectors “In1” from inputs to line outputs. If “In1” are configured like outputs, the total inputs are 3. Press PRG, to visualize on the display "OUT" write: By IN+ and IN- keys on change the “ON”...
Page 15
Grandinote srls Via primo maggio, 32 27042 Bressana Bottarone (pv) -it al y- P.IV A: 02659140186 COD. FISCALE: 02659140186 COD. IBAN: IT12B0838683800000000382064 BIC/SWIFT: ICRAITRRAQ0 www.grandinote.it grandinote@gmail.com www.facebook.com/grandinote Pag. 15 di 15...
Need help?
Do you have a question about the Grandinote Supremo and is the answer not in the manual?
Questions and answers