ENG
Dear customer,
thank you for choosing TESLA RoboStar W20.
Open the battery cover on the bottom of the device and insert 2 AA batteries
inside (not supplied) - make sure that the batteries are correctly polarized. Place
a virtual wall as shown, area A is a Cleaning area, area B is a Restricted area
where you do not want the robot. vacuum cleaner was cleaning.
1.
Place the machine in the desired locations and move switch „1" to
"Zapnuto/On"
2.
The green LED indicator light will flash and the device will start sending
a lockout signal
3.
the range of the transmitter is about 3 meters
A: Restricted area
1
On/Off switch
2
Signal transmitter
3
Battery cover
4
Indicator
B: Cleaning area