Section 6. Performance And Electrical Data - Trane OXBOX JMM5A0A24M21SAA Installer's Manual

Section 6. Performance and Electrical Data (WALL-MOUNT AIR HANDLERS ARE SUITABLE
FOR MOBILE HOME APPLICATIONS)
Airflow performance data is based on cooling performance with a coil and no filter in place. Select performance table for appropriate unit size
external static applied to unit allows operation within the minimum and maximum limits shown in table below for both cooling and electric heat
operation.
Airflow Performance(Standard CFM)
BLOW ER
Model
SPEEDS
JMM5A
Tap(5)
Tap(4)-Factory
24
Tap(3)
Tap(2)
Tap(1)
Tap(5)
Tap(4)
30
Tap(3)
Tap(2)-Factory
Tap(1)
Tap(5)
Tap(4)-Factory
36
Tap(3)
Tap(2)
Tap(1)
--- Shaded boxes represent airflow outside the required 300-450 cfm/ton.
* When JMM5A0A24M21SAA
NOTES:
1. Airflow based upon dry coil at 230V with no electric heat，no filter. For 24, 30,and 36 sizes, airflow at 208V is approximately the same as
230V because the mult-tap ECM motor is a constant torque motor. The torque doesn't drop off at the speeds in which the motor operates.
2. Airflow is equivalent for front or bottom return configurations.
3. SCFM is nearly the same with cooling performance airflow, the gap is in the 1 to 2%.
The air distribution system has the greatest effect on airflow. The duct system is totally controlled by the contractor. For this reason, the contractor
should use only industry-recognized procedures.
Heat pump systems require a specified airflow. Each ton of cooling requires between 350 and 450 cubic feet of air per minute (CFM), or 400 CFM
nominally.
Duct design and construction should be carefully done. System performance can be lowered dramatically through bad planning or workmanship.
Air supply diffusers must be selected and located carefully. They must be sized and positioned to deliver air along the perimerter of the space. If
they are too small for their intended airflow, they become noisy. If they are not located properly, they cause drafts. Air grilles must be properly sized
to carry air back to the blower.If they are too small, they also cause noise.
The installers should balance the air distribution system to ensure proper quiet airflow to all rooms in the home. This ensures a comfortable living
space.
0.1 0.18
0
913 881 848
825 787 756
737 700 666
675 632 598
590 548 512
1362 1325 1280
1282 1242 1195
1267 1225 1178
1157 1111 1061
1077 1028 978
1362 1325 1280
1282 1242 1195
1267 1225 1178
1157 1111 1061
1077 1028 978
used with 1.5ton outdoor unit ,select SCFM between 450 and 675.
is
EXTERNAL STATIC PRESSURE(in.w.c.)
0.4
0.2 0.3
848 818 792
753 717 682
663 630 589
596 555 521
499 455 430
1266 1238 1197
1176 1151 1111
1143 1120 1078
1052 1016 971
965 932 886
1266 1238 1197
1176 1151 1111
1143 1120 1078
1052 1016 971
965 932 886
11
0.5 0.6 0.7
763 731 691
650 617 580
550 511 474
480 440 399
368 338 309
1159 1119 1080
1071 1028 975
1036 993 942
929 884 842
850 804 768
1159 1119 1080
1071 1028 975
1036 993 942
929 884 842
850 804 768
0.8
650
540
436
366
263
1040
936
897
802
732
1040
936
897
802
732