Certificates - Viessmann WAGO MB/TCP gateway Installation And Service Instructions For Contractors

Declaration of conformity
The specialist electrical company that sets up the
WAGO MB/TCP gateway or the WAGO MB/RTU gate-
way and wires it for connection is responsible for the
Declaration of Conformity and for affixing the CE mark.
Only components from the standard delivery may be
used:
WAGO MB/TCP gateway
■
or
WAGO MB/RTU gateway
■ Power supply unit
After professional connection in accordance with
these installation and service instructions, the
WAGO MB/TCP gateway and the WAGO MB/RTU
gateway comply with the following directives:
2014/30/EU EMC Directive
2014/35/EU Low Voltage Directive
2011/65/EU RoHS II
To demonstrate conformity, the specialist electrical
company that carries out the installation must affix a
type plate with the following content, in accordance
with the EN 61439-1 standard:
■ Name of the specialist company
■ WAGO MB/TCP gateway
or
WAGO MB/RTU gateway
Date of manufacture
■
CE designation
■
■ EN 61439-1

Certificates

35