TERSO TS074 User Manual page 10

Installation
Inspection
With packaging in place, inspect the refrigerator for any damage that may have
occurred during transit. If any damage is present, please contact Terso
Technical Support at +1 (888) 376-0257 in the US or +49 621 8501 233 in
Europe.
Unpacking
 Remove the straps and remove all packaging. Gently position the
refrigerator in place on the ground.
 Remove accessories from inside the refrigerator. Items included
are a Power Cable and Ethernet Cable. Other items may also be
included such as an Ethernet Hub or other refrigerator specific items.
Proper Handling
Move the refrigerator to the installation site. There are wheels on the
refrigerator to aid in positioning. Roll the refrigerator by firmly pushing on the
middle section of the body. Always move the refrigerator with the door facing
you. Carefully roll the refrigerator into position leaving at least a 6" gap
between the refrigerator and the wall.
Connecting AC Power
Plug the refrigerator into a grounded wall outlet with a minimum of a 8A rating.
The power outlet must be within 3m / 6ft of the refrigerator and must be easily
accessible unobstructed outlet. Ensure that the on/off switch is easily
accessible.
In an emergency, the cord can act as an off switch.
Connecting Communications
Plug the Ethernet cable into the back panel and then into the appropriate wall
data jack or cellular router.
Access Verification
Present a pass below the LCD screen on the front panel. The LCD text should
indicate that the door is now unlocked. The door can be closed at any time and
will be locked upon doing so. This can be verified by gently pulling on the door
handle.
EDOC00052 – Large ULT RFID Refrigerator User Manual, rev 0 10