LG F1K2CS2T Owner's Manual page 32

Wireless LAN Module Specification
Model
Frequency Range
Output Power (Max.)
Wireless function S/W version : V 1.0
For consideration of the user, this device should be
installed and operated with a minimum distance of
20 cm between the device and the body.
Standby power consumption
Network standby power consumption
The period of time after which the power
management function, or a similar function,
switches the equipment automatically
into standby and/or off mode and/or the
condition providing networked standby
Declaration of Conformity
Hereby, LG Electronics declares that the radio
equipment type Washing machine is in compliance with
Directive 2014/53/EU. The full text of the EU declaration
of conformity is available at the following internet
address:
http://www.lg.com/global/support/cedoc/cedoc#
LG Electronics European Shared Service Center B.V.
Krijgsman 1
1186 DM Amstelveen
The Netherlands
LCW-004
2412 ~ 2472 MHz
IEEE 802.11b: 17.82 dBm
IEEE 802.11g: 17.72 dBm
IEEE 802.11n: 16.61 dBm
0.5 W
3.0 W
20 min.
Open Source Software Notice Information
To obtain the source code under GPL, LGPL, MPL, and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license terms,
warranty disclaimers and copyright notices are available
for download.
LG Electronics will also provide open source code to you
on CD-ROM for a charge covering the cost of performing
such distribution (such as the cost of media, shipping,
and handling) upon email request to opensource@lge.
com. This offer is valid for three (3) years from the date
on which you purchased the product.
Smart Diagnosis™ Using a Smart Phone
• For appliances with the
Use this function if you need an accurate diagnosis by
an LG Electronics customer information centre when the
appliance malfunctions or fails.
Smart Diagnosis™ can not be activated unless the
appliance is connected to power. If the appliance is
unable to turn on, then troubleshooting must be done
without using Smart Diagnosis™.
or logo
31