Vmac V900104 Installation Manual page 18

Body
OEM bolt and washer
□
Remove three bolts from the inlet valve on the compressor and
install the intake guard plate using the three bolts (Figure 3.13).
Position it so that the short end of the hose will attach to the
intake and the long end to the remote filter. Tighten the inlet
valve bolts and secure the hoses with the supplied clamps.
V900104 Only
□
Insert the supplied spacers between the frame and the sway bar
mount and fasten the sway bar in place with the supplied flange
head bolts (Figure 3.13).
V900106 Only
□
Attach the large supplied sway bar spacer to the frame using the
OEM bolts. Use the 3/4" sway bar spacer between the sway bar
and the large sway bar spacer. Attach the sway bar to the sway
bar spacer using the supplied flange head bolts (Figure 3.14).
18
Front bumper
Figure 3.12
VMAC – Vehicle Mounted Air Compressors
Body mount
Toll Free: 1-888-241-2289
Fax: 1-250-740-3201