Led Indicators - Vizio SB3621n-E8 Quick Start Manual

LED INDICATORS

The LED Indicators will behave differently with each button on the remote control.
Function
Input
Bluetooth
Flash from the bottom to the
Pairing
DTS
TruVolume
On/Off
LED Behavior
(When searching for device)
top and back continuously.
TruVolume On
TruVolume Off
LED Indicators are located here.
Press the INPUT button on the remote to cycle through the available inputs:
•Analog Audio In - AUX Stereo 3.5mm
•Coaxial In - Digital
•Digital Optical Audio In - Optical
•Bluetooth
•USB In - USB
Press and hold the INPUT button on the remote control for 3 seconds to
enable the auto input detect function.
Press and hold the button on the remote. The Sound Bar will be
discoverable for 15 minutes. You can now search for the Sound Bar (VIZIO
SB3621n) using your Bluetooth Device. The sound bar will power down if
no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
Press the TVOL button to enable/disable TruVolume.
When enabled (On), TruVolume provides a consistent and comfortable
volume level for a more enjoyable listening experience.
Description
English - 15