Memory Playback (For Mp3 Cds) - Pioneer PD-10AE Instruction Manual

Various Playback Modes-Continued
2
Use the Previous and Next [
to select the first file you want to add to the
playlist, and then press [ENTER] button.
Track to be added
to the playlist
Repeat this step to add additional files to the playlist.
Alternatively, you can use the number buttons on the
remote controller to select files instead of the Previ-
ous and Next [

Notes:
• If the total playing time is more than 99 min-
utes and 59 seconds, "– –:– –" appears.
• You can add up to 25 files to the playlist. If you try
to add more, the message "MEM FULL" appears.
3
To start memory playback, press the
[ENTER] button. Memory playback starts.
Alternatively, you can start playback with the
Play [ ] button.
1
∫To Change the Display
While creating a playlist for memory playback, you
can press the [DISPLAY] button to change the dis-
play information as follows:
Total playback
time of the
memorized files
∫To Select Other Files During Memory
Playback
Use the Previous and Next [
∫To Check What's on the Playlist
While playback is stopped, use the Fast Reverse
and Fast Forward [
through the playlist.
∫To Remove Files from the Playlist
• While memory playback is stopped, press the
[CLEAR] button. Each press removes the last file
from the playlist.
• The playlist is deleted when you change the play-
back mode (i.e., when you press the [MEMORY]
button after stopping playback).
22
En-
]/[ ] buttons
 
Total time of
playlist
]/[ ] and the [ENTER] buttons.

Track currently playing
Current play-
Memory
back time of the
number
selected file
]/[ ] buttons.
: 9
]/[ ] buttons to scroll
22 11
∫To Cancel Memory Playback
• Stop playback, then press the [MEMORY] button to
change the playback mode. The MEMORY indica-
tor disappears, and memory playback is cancelled.
• Memory playback is cancelled when the disc is
ejected.

Memory Playback (For MP3 CDs)

ENTER
Memory Playback in Navigation Mode
Memory playback can be set only when playback is
stopped.
1
Press the [MEMORY] button; the MEMORY
indicator appears.
2
Press the [ ] or [

∫
The CD Player enters Navigation mode and
"ROOT" appears on the display.
3
Press the [ENTER] button.
The first folder name in ROOT appears on the
display.
4
Use the [ ]/[ ] buttons to select other fold-
 
ers and files at the same level.
Folders that don't contain files or subfolders
can't be selected. Repeat steps 3 and 4 to
select the files and subfolders in that folder.
5
Press the [ENTER] button.
The first item is memorized in the playlist.
MEMORY
MEMORY indicator
] button.