Table of Contents
Related Manuals for Russell Hobbs Steam & Clean
Summary of Contents for Russell Hobbs Steam & Clean
- Page 1 Steam & Clean Steam Mop Model Number: RHSM1001-G For Customer Services & Spare Parts please call 0345 209 7461 Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm Or visit us at www.productcare.co.uk PLEASE RETAIN FOR FUTURE REFERENCE...
-
Page 2: Table Of Contents
17-18 Disposal information Thank you for purchasing your Russell Hobbs Steam & Clean Steam Mop. To get the best from your new cleaner, take a few moments to read these instructions, and keep them in a safe place for future reference. -
Page 3: Safety Instructions
SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • It is hazardous for anyone other than a competent person to carry out any service or repair operation that involves the removal of a cover which gives protection against exposure to electrical parts. - Page 4 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • Do not direct steam at people, animals, electrical outlets, or equipment containing electrical components. • Unplug from power outlet when not in use. Do not leave steam mop unattended while plugged in.
- Page 5 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • The use of accessory attachments not recommended by the appliance manufacturer may cause fire, electric shock or injury. Only use the accessories supplied by the manufacturer. •...
- Page 6 SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS READ CAREFULLY AND KEEP FOR FUTURE REFERENCE WARNING: • Close attention is necessary when used near children. • Do not store with a wet mop pad still attached. • Using distilled or demineralized water will maximize the performance of your steam mop.
-
Page 7: Steam Mop Feature Diagram
STEAM MOP FEATURE DIAGRAM Power cord Handle assembly release Power dial Power indicator light Mop head Carpet glider Quick cord release and hook Handle top release button Handle tube Water tank and cap Mop head release Microfibre mop pad Measuring jug For Customer Services &... -
Page 8: Steam Mop Assembly
STEAM MOP ASSEMBLY Before using your steam mop: Remove all packaging and lay out the separate components. Check the steam mop after unpacking for any visual damage such as: • Misaligned or damaged parts • Damage to the main body and separate components •... - Page 9 STEAM MOP ASSEMBLY Floor head attachment Attach the floor head to the main body, aligning and lowering the unit frame onto the connector of the floor head, until it secures into place. You can remove the floor head by pushing in the release button above and lifting away the unit.
-
Page 10: Filling The Water Tank
FILLING THE WATER TANK Note: Before filling/re-filling the water tank, unplug the steam mop. Do not touch any hot parts before allowing them to cool sufficiently. 1. Tilt the steam mop so that the tank is at an easy angle for filling. 2. -
Page 11: Using Your Steam Mop
USING YOUR STEAM MOP Preparing for use Make sure your floors are vacuumed/swept before using the steam mop. Using 1. Twist the cord release, plug the steam mop into a mains socket and switch the power on. 2. Make sure the water tank is filled, following instructions on page 10. 3. -
Page 12: Storing Your Steam Mop
STORING YOUR STEAM MOP After use 1. When you require a break or have finished steam cleaning, tilt the steam mop forwards so that it is stood vertical. This will stop the unit from steaming. 2. Turn the power dial to the ‘off’ position and allow the unit to cool. 3. -
Page 13: Cleaning And Care
CLEANING AND CARE Before you clean the appliance, disconnect the mains plug from the wall socket. To clean the exterior of the device, use a damp, soft cloth and mild detergent. NEVER IMMERSE THE STEAM MOP IN WATER. When wiping off the main body, do not allow moisture in the area around the indicator light. -
Page 14: Problem Solving
PROBLEM SOLVING PROBLEM POSSIBLE PROBLEM POSSIBLE SOLUTION 1. Water tank may not be 1. Make sure the water tank is filled. Refer to page 10 of filled. the instruction manual provided. 2. The unit may not be 2. Verify the unit is plugged into an approved electrical Reduced steam/no plugged in properly/the outlet and that the fuse or breaker is functioning properly. -
Page 15: Guarantee And Customer Services
GUARANTEE AND CUSTOMER SERVICES At Russell Hobbs, we take all our customer feedback seriously. Feel free to contact our Product Care Team, on 0345 209 7461 Monday – Friday: 8am-8pm & Saturday: 9am – 1pm, who will be more than happy to assist you. -
Page 16: Spare Parts
SPARE PARTS To check the availability of the following spare parts, simply contact our friendly Customer Services team using the details provided at the bottom of this page. Microfibre mop pad Handle Carpet glider For Customer Services & Spare Parts please call 0345 209 7461 Opening times: Monday - Friday 8am –... -
Page 17: Connection To The Mains Supply
CONNECTION TO THE MAINS SUPPLY WARNING- THIS APPLIANCE MUST BE EARTHED This appliance is designed to operate from a mains supply of 220-240V~ 50Hz. Check that the voltage marked on the product corresponds with your supply voltage. This product is fitted with a 13A plug complying with BS1363. If this plug is unsuitable or needs to be replaced, refer to customer services. - Page 18 CONNECTION TO THE MAINS SUPPLY For UK use only – PLUG • As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows: •...
- Page 19 NOTES...
-
Page 20: For Customer Services & Spare Parts Please Call 0345 209 7461
Model: RHSM1001-G Made by G2S Ltd under license. G2S Limited, Wigan, WN2 4AY Russell Hobbs is the registered trademark of Spectrum Brands (UK) Ltd. This symbol is known as the 'Crossed-out wheelie bin Symbol'. When this symbol is marked on a product/batteries, it means that the product/batteries should not be disposed of with your general household waste.
Need help?
Do you have a question about the Steam & Clean and is the answer not in the manual?
Questions and answers