Vanco PULCEAUDIO PA360 Battery Replacement
  1. Manuals
  2. Brands
  3. Vanco Manuals
  4. Speakers
  5. PULCEAUDIO PA360
  6. Battery replacement

Vanco PULCEAUDIO PA360 Battery Replacement

Hide thumbs
1
2

Advertisement

Table of Contents

The included battery in the PA360 is a lithium-ion battery. If not regularly used, the battery
must be conditioned every 6 months to avoid battery failure. To condition the battery,
simply plug in the PA360 to power, and charge to full level.
To replace the battery on the PA360, the replacement part # is BATT-360. See below for
instructions to replace the battery:
1. At the bottom of the PA360, you will find a panel with three Phillips screw heads, unscrew
all three and lift panel up to expose the battery
2. Once the battery is exposed, locate the connector. The connector has one tab, press the
tab and the opposite end, and pull the connector out to disconnect the battery
PA360 Battery Replacement

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PULCEAUDIO PA360 and is the answer not in the manual?

Questions and answers

Related Manuals for Vanco PULCEAUDIO PA360

Summary of Contents for Vanco PULCEAUDIO PA360

  • Page 1 PA360 Battery Replacement The included battery in the PA360 is a lithium-ion battery. If not regularly used, the battery must be conditioned every 6 months to avoid battery failure. To condition the battery, simply plug in the PA360 to power, and charge to full level. To replace the battery on the PA360, the replacement part # is BATT-360.
  • Page 2 3. Place the new battery (BATT-360) on the foam pad, within the specific cutout for the battery 4. Connect the battery’s male connector to the PA360’s female connector. Ensure it is a secure connection 5. Reinstall the panel and screw back in 6.

Table of Contents