Matco Tools MCL144DD Operating Instructions Manual

• Operating Instructions • Warning Information
Length . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9"
Weight (Tool With Battery) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 .3 lbs .
Height (Tool With Battery) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10"
Battery Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 .4V Lithium Ion
Free Speed Drill Mode Low . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-325 RPM
Free Speed Drill Mode High . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0-1170 RPM
Maximum Torque . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300 inch lbs .
Number of Clutch Settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Charge Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . < 60 min .
Compatible Battery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .MCL144LB
Compaible Charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . MCLCHRG
AlwAys reAd
instructions
before using
power tools
AlwAys weAr
sAfety goggles
weAr heAring
protection
Avoid
prolonged
exposure to
vibrAtion
MCL144DD
• Parts Breakdown
S P E C I F I C A T I O N S
some dust created by power sanding, sawing, grinding, drilling, and other construction
activities contains chemicals known to cause cancer, birth defects or other reproductive
harm. some examples of these chemicals are:
• lead from lead-based paints,
• crystalline silica from bricks and cement and other masonry products, and
• arsenic and chromium from chemically-treated lumber.
your risk from these exposures varies, depending on how often you do this type of
work. to reduce your exposure to these chemicals: work in a well ventilated area, and
work with approved safety equipment, such as those dust masks that are specially
designed to filter out microscopic particles.
MCL144DD
Copyright © Professional Tool Products, 2009
1
®
MCL144DD
14.4V 3/8"
Drill Driver
All rights reserved.
rev. 09/09/09