SAFETY INSTRUCTIONS FOR COMMERCIAL USE READ ALL INSTRUCTIONS BEFORE USING THIS MACHINE • Use indoors only. Do not expose to rain. • Do not allow it to be used as a toy. Use caution when operating near children. • Use only as described in this manual. •...
Machine Set-Up 1. Handle Bar 2. Control Panel 10. Battery a ...Hour Meter 11. Valve, Solution Volume Control b ..Battery Condition Indicator 12. Frame c ...Brush Motor Switch 13. Wheel d ..Vacuum Motor Switch 14. Brush/Pad Holder e. ..Solution Switch 15.
Daily Operation and Maintenance How to Install Batteries Caution: Batteries are heavy. Install (2) 12-volt deep cycle batteries. New Batteries should be given a full charge before first use. Limit the use of new batteries during the first 5 cycles. 1.
How To Operate The Machine 1. To turn the power on, turn the key switch (22). The power/battery indicator (b) will light up. 2. Check the battery capacity to see if it is full – all indicators are lit up when batteries are fully charged.
What to Do When Operating The Machine Vacuuming Up Solution 1. Make sure the squeegee is in the down position. 2. As the machine moves forward and solution is dispensed, the squeegee will vacuum it up into the recovery tank. 3.
Troubleshooting WARNING - Before performing maintenance or making adjustments, switch off the machine and disconnect the battery. Problem: Possible Cause: Solution is not being Vacuum motor is not running picked up Water filter is clogged Recovery tank is full Squeegee or vacuum hose is clogged, broken or disconnected Bad seal at tank cover, vacuum motor or squeegee Worn or misaligned squeegee blades.
For warranty information go to www.Powr-Flite.com A Tacony Company 3101 Wichita Court • Fort Worth, TX 76140-1755 1-800-880-2913 • Fax: 1-817-551-0719 • www.Powr-Flite.com...
Need help?
Do you have a question about the Powr-Flite PAS17BA and is the answer not in the manual?
Questions and answers