Inspection Before Each Use; Inspection Check List - BRP Can-Am HD 4500 2020 Operator's Manual

INSPECTION BEFORE EACH USE

Always inspect and confirm the safe operating condition of your winch before us-
age.
Perform a thorough inspection before each use to detect any potential prob-
lem that could occur during operation. The inspection can help you monitor
component wear and deterioration before they become a problem. Correct
any problem that you discover to reduce the risk of an accident.

Inspection Check List

What to Do Before Using the Winch
ITEMS TO BE
INSPECTED
Cleanliness
Metal wire rope
Synthetic rope
Roller Fairlead
(Metal wire rope)
Hawse (Synthetic
rope)
Hook
Hand strap
Switch Condition
Motor operation
Battery Condition
Solenoid Condition
________
8
WARNING
INSPECTION TO PERFORM
Thoroughly clean all winch area, including pulling rope out for
cleaning. Avoid strong detergents.
Verify if rope has any
damage, replace if damaged.
Verify if rope has any
damage, replace if damaged.
Ensure area is clean, remove any obstructions, verify there is
no damage or bends and that rollers run smoothly
Ensure area is clean, smoothen any burrs or scratches to
avoid abrasion of the rope
Verify hook is not crooked or damaged, and that hook latch
closes properly
Ensure hand strap is present. Always use hand strap to avoid
injury.
Ensure no cracks or exposed wires
Ensure the motor works properly, also verify free spool works
properly
Ensure battery will have sufficient charge for operating the
winch. When possible let engine idle while using the winch.
Ensure terminal screws are properly tightened.
Ensure terminal nuts are properly tightened.
SAFETY INFORMATION
Look for kinks, tight loops, or
broken wire strands
Look for large number of
broken fibers, or shiny
sections or compressed
sections
________
✔