VOLTCRAFT BS-450 HDWT Operating Instructions Manual page 27

• When the maximum illuminance has been reached, the LED illumination switches off the
next time the button (8) is pressed. Press the button (8) again to turn on the LED illumination.
Adjust the brightness so that the camera image displayed on the monitor is not over-
or underexposed.
Zooming
4
• Press the up & zoom button (9) to zoom in on the picture. Each press of the button enlarges
the image by half a step (max. 2x). Then the normal size is displayed again.
Taking photos or recording videos
5
Open the cover (1) and insert an SD card into the memory card slot. (max. 32 GB,
Class 6 or higher)
• The on/off & snapshot button (5) is located in the middle of the display.
• A "CAMERA" or "RECORDER" icon appears in the upper left corner of the LC screen.
• When the CAMERA icon is displayed, the snapshot button (5) will take a picture once
pressed.
• When the RECORDER icon is displayed, the snapshot button (5) starts or stops the record-
ing process once pressed.
By connecting the supplied Micro USB cable to the USB jack (1) and the PC, you can
view and copy the stored photos or videos on the PC.
27