Table of Contents
Advertisement
KENWOOD CORPORATION
OPERATING BASICS
Switching Power ON/OFF
**
Turn the Power switch/ Volume control clockwise to switch the transceiver ON.
Turn the Power switch/ Volume control counterclockwise to switch the transceiver OFF.
Adjusting the Volume
**
Rotate the Power switch/ Volume control to adjust the volume.
Selecting a Channel
**
Rotate the Channel selector to select a channel.
Clockwise increases the channel number and counterclockwise decreases it.
Making a Call
**
1 Select the desired channel.
2 Press and hold the Monitor key (Programmed function `Monitor`) to determine whether or not the current channel is
being used.
• If the channel is busy, wait until it becomes free.
3 Press and hold the PTT switch, then speak into the microphone in your normal voice.
• For best results, hold the microphone approximately 3 to 4 cm (1 1/2 inches) from your lips.
4 Release the PTT switch to receive.
AUXILIARY FEATURES
Time-out Timer (TOT)
**
The TOT is used to automatically inhibit transmission after a specified time elapse. If the PTT switch is held down for
longer than specified time, the transceiver will stop transmitting and a tone will sound. Release the PTT switch, then
press it again to continue transmitting.
ATING BASICS
FCC ID: ALH36423120
FCC ID: ALH36423130
IC:
282D-36423130
Advertisement
Table of Contents
